365GTC/4 Ignition boxes | FerrariChat
Buy

365GTC/4 Ignition boxes

Discussion in 'Technical Q&A' started by geffen365gtc/4, Jun 28, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. geffen365gtc/4

    geffen365gtc/4 Karting

    Mar 12, 2005
    191
    #1 geffen365gtc/4, Jun 28, 2007
    Evening All- I'm soon to be upgrading my stock boxes ( Mark Ten B ) to a Permatune setup ( AEC 103A ).....and I have a couple of questions. The oem boxes have five wires, as follows;
    Black- ground
    Red- 12+ hot
    White- coil +
    Grey- coil -
    Green- post on the side of the dizzy

    The red wire plugs into a harness in the front of the engine bay.....I assume that this is the 12+ feed to the system. Also, what plug gaps work well with the AEC 103A???

    Thanks for the input....Geffen
     
  2. synchro

    synchro F1 Veteran

    Feb 14, 2005
    9,294
    CHNDLR
    Full Name:
    Scott
    #2 synchro, Jun 29, 2007

    What plugs are you going to use?

    The Dino guys have several threads about plugs and Permatunes (great unit!), but your car may be a different application,
    hope these are helpful:
    http://www.ferrarichat.com/forum/showthread.php?t=99252&highlight=plug+gap

    http://www.ferrarichat.com/forum/showthread.php?t=146707
     

Share This Page