3x8, mondial fuel injector puller

A while back I sold a fuel injector puller with a set of steel injectors I had for sale. Thanks to all those who expressed an interest in the puller. I have about 10 or so of these left for anyone who might be interested. See the video link and photos to view the puller in action. The kit comes with a ratcheting stubby wrench which makes injector removal quick and easy and the support tube is made of a non marring material to prevent scratches/scuffs to the intake manifold. I'm selling the remaining pullers for $55/each shipped in the Continental US. Note that these will be the last ones and once they're gone they're gone.

[ame]www.youtube.com/watch?v=2FVUxF6G_Nw[/ame]
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

I have a few more of these pullers still available.

 

Sale for the remaining few pullers. $40 shipped in the Continental US

 

Definitely will work on your 3.2 Mondial. I've never tested it on a 308 GTSi but the Ricambi parts pages indicate that the 308 GTSi uses the same injector as those used in the 3.2 motors so the thread pitch and diameter of the tool will be correct.

 

David this will indeed work on a Mondial 3.2 and I do have one left for you. PM sent regarding payment instructions.

 

You got it. I have just a few more left now. PM sent regarding payment instructions.

 

Thanks for all of the interest. Everyone who purchased an injector puller should be receiving theirs in the mail in the next two-three days. At this point it looks like I have three left (maybe 4, as someone who reserved one has yet to send payment).

 

Boxer, PM sent regarding payment instructions

Sent from my SM-G900V using Tapatalk

 

Thank you everyone, at this point the remaining pullers have been spoken for. I'm still waiting on payment from several folks so if any of the sales fall through I'll let you know. I hadn't planned on making any more of these but I suppose if there's enough interest (at least 10 buyers) I could round up some more parts and make more. Note that this would be at the original price of $55 shipped and would continue to include the ratcheting stubby wrench.

Sent from my SM-G900V using Tapatalk

 

One of the pullers has become available as the gentleman who originally reserved it didn't want to use PayPal to complete payment. Let me know if someone would like it for $40 shipped.

There may be a second one available as I have yet to receive payment from another fellow who requested one.

Sent from my SM-G900V using Tapatalk

 

Ok, its hard to keep it all straight as there have been several inquiries over the last day or so but I think Tim is going to get the last one. It does seem that that there may be some additional interest out there for more of these. If I get enough requests (5 or 6 more) I'll put together another batch. Note that these will be at the original price of $55 shipped. Thanks again to everyone who purchased one, I hope you find it helpful for your fuel injector project.

 

It looks like there was enough interest so I'm making another batch. Nearly all of the parts have arrived so I'll start assembling them over the next week. Let me know if you'd like one. $55 includes shipping in the Continental US and I'll cover paypal fees.

 

The second batch of these are now ready. Those that had one reserved have already been notified. PM me if you'd like one ($55 shipped in the Continental US).

 

Thank you for the inquires. It looks like I have 5 of the pullers left from this second batch.

On a separate note, my sincere apologies to those that can't, or don't want to use PayPal. Unfortunately my real job keeps me very busy and I simply don't have time to deal with personal checks.

 

You got it P4AntonLM. PM sent with payment instructions

Sent from my SM-G900V using Tapatalk

 

Anton, your puller is on its way.

For those that may interested I have 4 pullers left from this batch.

Sent from my SM-G900V using Tapatalk

 

Mike, PM sent with payment instructions.