400i S2 distributor | FerrariChat

400i S2 distributor

Discussion in '365 GT4 2+2/400/412' started by markcF355, Feb 3, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. markcF355

    markcF355 F1 Rookie

    Jun 6, 2004
    3,493
    Schmeckelstan
    Full Name:
    Mark
    On the S2 with one distributor, how do you keep the vertical drive shaft under the distributor from floating up and down?

    I has around 6 degrees of play as it rides up and down the worm gear.
     
  2. dr.mike

    dr.mike Karting

    Oct 31, 2003
    153
    Laguna Hills, CA
    Full Name:
    Mike Adams
    Theoretically, I think the drag force is supposed to keep it pulled down. I didn't trust it. So, I made a nylon bushing with about .005" clearance to keep everythng where it is supposed to be. So far, no explosions, etc.
     
  3. markcF355

    markcF355 F1 Rookie

    Jun 6, 2004
    3,493
    Schmeckelstan
    Full Name:
    Mark
    I find that totally amazing. Almost every other version has locking dogs or some other type of lock.
     

Share This Page