400i stickyauto trans. shift selector bar | FerrariChat
Buy

400i stickyauto trans. shift selector bar

Discussion in '365 GT4 2+2/400/412' started by jacques, Sep 23, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jacques

    jacques Formula Junior

    May 23, 2006
    877
    Los Angeles/Florida
    #1 jacques, Sep 23, 2007
    The black selector bar on my 1980 400i has developed a tendency to stick in either the down (select mode) and also in the up (selected mode)..Before I take it to the tranny shop.. Does anyone know whether this is the spring within the console or external linkage on the tranny under the car..if it's inside I'll tackle it myself..all help and opinions welcommed and appreciated...thank you all in advance..Jacques...
     
  2. It's Ross

    It's Ross Formula 3

    Jul 30, 2007
    2,028
    Barrington, Ill. USA
    Full Name:
    Ross
    #2 It's Ross, Sep 26, 2007
    The problem will be in the handle.
     
  3. markcF355

    markcF355 F1 Rookie

    Jun 6, 2004
    3,493
    Schmeckelstan
    Full Name:
    Mark
    #3 markcF355, Sep 28, 2007
    Does your handle move up and down?
    There is a clamp that holds the handle tube in place. When the clamp loosens, the tube can move upward. At that point when you press the button, it doesn't go down far enough to release the latch. Try pushing down on the whole handle as you press the button.
     

Share This Page