400i Sunvisor clips | FerrariChat
Buy

400i Sunvisor clips

Discussion in '365 GT4 2+2/400/412' started by Bubba5320, Apr 14, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Bubba5320

    Bubba5320 Karting
    Rossa Subscribed

    Apr 18, 2024
    109
    Phoenix
    Full Name:
    Bubba
    #1 Bubba5320, Apr 14, 2025
    Just wondering if anyone has had a problem with their sunvisor clips? I have one that broke and one that is warped and won’t hold the visor. Wondering what anyone has done to replace or fix. Thanks for any suggestions.
     
  2. au400i

    au400i Rookie

    Oct 26, 2018
    45
    Sydney Australia
    Full Name:
    Thomas Clement
    #2 au400i, Apr 14, 2025
    I’m in the same position. Maybe someone could organise to 3D print a batch? I assume all the cars have a cream headlining so all the sun visor clips are cream?
     
  3. raemin

    raemin Formula 3

    Jan 16, 2007
    2,276
    Lyon (FR)
    Full Name:
    R. Emin
    #3 raemin, Apr 14, 2025
    The original Lancia Epsilon had a compatible clip, unfortunately this source has been depleted for long... there was a discussion on 3d-print.

    "Do not jump-start the car, and do not detach the sunvisor." (My instructions to whoever drives my car).
     
  4. Bubba5320

    Bubba5320 Karting
    Rossa Subscribed

    Apr 18, 2024
    109
    Phoenix
    Full Name:
    Bubba
    #4 Bubba5320, Apr 14, 2025
    Thanks all for getting back. I found a couple of leads. One from a thread here on fchat and one from eBay. I contacted the eBay guy and it sounds like he can make them. I’m also looking at some generic doorman parts to see how they fit or if can be modified. I most interested in function than exact replication.

    https://www.ferrarichat.com/forum/threads/sunvisor-clips.231253/page-12

    https://www.ebay.com/itm/297072618904?mkevt=1&mkpid=0&emsid=e11051.m43.l1123&mkcid=7&ch=osgood&euid=e1676f30fb9446d3ae289e0d02607d1c&bu=43153204325&osub=-1%7E1&crd=20250414190651&segname=11051
     
  5. galbert

    galbert Formula Junior

    Mar 14, 2012
    374
    sud ouest france
    Full Name:
    Galbert Christopher
    #5 galbert, Apr 21, 2025
    ma compagne refabrique des éléments plastique en coulée sous vide d'air (pas de la 3D)
    Peut-être que cela pourrait vous intéresser.
    même résistance que des éléments en injection .
     
  6. nickm

    nickm Formula Junior

    Jan 20, 2004
    377
    Ventura Ca.
    #6 nickm, Apr 28, 2025 at 11:04 AM

Share This Page