430 Key Painting | FerrariChat
Buy

430 Key Painting

Discussion in '360/430' started by JDoggery, Sep 13, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. JDoggery

    JDoggery Rookie

    Nov 1, 2013
    40
    #1 JDoggery, Sep 13, 2015
    Last edited by a moderator: Sep 7, 2017
    I've seen a few 430 keys that are painted, and came across a thread for the 360, but I wanted to see if anyone had any tips for taking the key apart, painting, etc.

    I found this picture online. Looks like the button can also be removed, but not the logo?

    If anyone has pics of their process, end result it would be most helpful. Thanks.
    Image Unavailable, Please Login
     
  2. ph12

    ph12 Karting

    Jun 28, 2015
    178
    Los Angeles
    #2 ph12, Sep 14, 2015
    i probably will try to do this after ordering some rosso corsa touch up paint
     
  3. rizzo308

    rizzo308 F1 Rookie
    Silver Subscribed

    Sep 12, 2004
    2,780
    Perth, Australia
    Full Name:
    riggio
    #3 rizzo308, Sep 14, 2015
    The logo u can remove with a bit of gentle prying with a small screw driver. oOnce you paint it don't refit the ring as it will wear the paint away around the hole as it has done in ur pic I used a black boot lace as a loop to attaché my fob to the key.
     
  4. JDoggery

    JDoggery Rookie

    Nov 1, 2013
    40
    #4 JDoggery, Sep 14, 2015
    Is the logo glued on? Yea, definitely not going to use a metal ring once it is cleaned up. Any pics of what you guys are using instead?
     

Share This Page