430 Mirrors | FerrariChat

430 Mirrors

Discussion in '360/430' started by desertcolt07, Feb 1, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. desertcolt07

    desertcolt07 Rookie

    May 11, 2006
    3
    #1 desertcolt07, Feb 1, 2011
    Last edited by a moderator: Sep 7, 2017
  2. hangarsixco

    hangarsixco Formula Junior

    Oct 10, 2010
    396
    S. California
    Full Name:
    Chris
    First off what the hell happened? Sorry to see the mirror like that. On the tweeter triangle you can lightly pull from the top towards the inside of the vehicle, this will slide out of the rubber housing, and then you can lightly lift up once the tip has cleared the rubber housing. Once this is off you will see all the necessary hardware to remove the mirror. You will need to disconnect the harness plug before removing the mirror. Now I have a 360 not sure if the mounting hardware is in the same location but the tweeter housing is the same.

    Good luck!
     
  3. numisrx

    numisrx Formula Junior
    Silver Subscribed

    Jul 4, 2007
    460
    Pasadena, CA
    Full Name:
    Wayne
    The exact words that went through my mind before I read the posts!

    ??
     
  4. TheMayor

    TheMayor Ten Time F1 World Champ
    Rossa Subscribed

    Feb 11, 2008
    106,102
    Vegas baby
    I put a clear shield over mine when it was new to prevent this sort of thing. You might want to consider that next time.
     
  5. Testacojones

    Testacojones F1 Veteran

    Nov 3, 2003
    5,198
    Florida
    Full Name:
    Luix Lecusay
    It's got to be a flat black wrap that went like crap from either bad installation, track events or age. A painted mirror wouldn't have that fate.
     
  6. HH11

    HH11 F1 Rookie
    Rossa Subscribed

    Sep 4, 2010
    3,344
    I was thinking a wrap job removal gone wrong as well. It looks like some of the markings have that torn/peeled off look.
     
  7. ZIP22

    ZIP22 Karting

    Jun 7, 2009
    157
    Pops off with a flat head screwdriver...make sure to wrap the flathead with painters tape to prevent marring other surfaces by accident.
     
  8. desertcolt07

    desertcolt07 Rookie

    May 11, 2006
    3
    thanks, it has a vinyl wrap on it but its not very elastic, doesn't fit the mirrors too well.
     
  9. hangarsixco

    hangarsixco Formula Junior

    Oct 10, 2010
    396
    S. California
    Full Name:
    Chris
    Were you able to get the tweeter triangle off? Any luck with the removal of the mirror assembly?


     
  10. desertcolt07

    desertcolt07 Rookie

    May 11, 2006
    3
    haven't tried yet, i'll give it a shot when i get home and i'll let you know how it goes. cheers
     
  11. johnb@macarbon

    johnb@macarbon Formula Junior

    Feb 24, 2004
    809
    SF Bay Area
    Full Name:
    John Borchelt

Share This Page