430 to 355 paddle shifters | FerrariChat
Buy

430 to 355 paddle shifters

Discussion in '348/355' started by BLAMPEE, May 28, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BLAMPEE

    BLAMPEE Man Card Status: Never Issued

    Jun 28, 2008
    15,424
    Sunny Heavenly Beautiful Arizona
    #1 BLAMPEE, May 28, 2009
    Does anyone know if the Nickel-look OEM F430 paddle shifters will fit my 355?
     
  2. ferraridriver

    ferraridriver F1 Rookie

    Aug 8, 2002
    4,152
    Bay Area Calif.
    Full Name:
    Dave
    #2 ferraridriver, May 28, 2009
  3. BLAMPEE

    BLAMPEE Man Card Status: Never Issued

    Jun 28, 2008
    15,424
    Sunny Heavenly Beautiful Arizona
    #3 BLAMPEE, May 28, 2009
  4. ferraridriver

    ferraridriver F1 Rookie

    Aug 8, 2002
    4,152
    Bay Area Calif.
    Full Name:
    Dave
    #4 ferraridriver, May 28, 2009
    I don't know for sure but I suspect so, call Daniel at Ricambi and ask him
     
  5. BLAMPEE

    BLAMPEE Man Card Status: Never Issued

    Jun 28, 2008
    15,424
    Sunny Heavenly Beautiful Arizona
    #5 BLAMPEE, May 28, 2009
    Excellent. Thanks! :D
     
  6. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,390
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #6 tazandjan, May 28, 2009
    BP- That set for $100 in FerrariAds looks pretty good, no?

    Taz
    Terry Phillips
     
  7. J. Salmon

    J. Salmon F1 Rookie
    Owner Rossa Subscribed

    Aug 27, 2005
    4,367
    VA
    #7 J. Salmon, May 28, 2009
    Previous owner of my car removed the paddles and bead blasted them. They have a nice gray finish, still say "up" and "down" as before. Same was done to the triangular trim pieces at the window corners, so it matches. Also matches the gray of the CS steering wheel.

    Just an idea...
     
  8. Exotica Motorsports

    Exotica Motorsports F1 Rookie

    Nov 1, 2003
    3,673
    Washington
    Full Name:
    Jason Godsil
    #8 Exotica Motorsports, May 28, 2009
    Just FYI, the F430 paddles won't fit a 360 so I doubt they will fit a 355. The F430 paddles will bolt on a 360 but they are much more angled towards the steering wheel where the 360 paddles are shallower. This means that when you try to shift the F430 paddles will hit the steering wheel on a 360.
     
  9. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,984
    MD and NE
    Full Name:
    Robbie
    #9 285ferrari, May 28, 2009
    Just refinish the stock ones back to original...
     
  10. BLAMPEE

    BLAMPEE Man Card Status: Never Issued

    Jun 28, 2008
    15,424
    Sunny Heavenly Beautiful Arizona
    #10 BLAMPEE, May 28, 2009
    You already did that two months ago, Robbie. LOL.

    I just saw the nickel-look f430 ones on FerrariAds. ;)

    They are pretty!
     
  11. Monteman

    Monteman Formula 3

    Feb 9, 2006
    2,351
    Santa Barbara, CA
    Full Name:
    Monte
    #11 Monteman, May 28, 2009
    I looked at doing the same thing but they won't fit. The 355 has a bolt spacing of 2.5" and the 430 is 2.25"
     
  12. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,984
    MD and NE
    Full Name:
    Robbie
    #12 285ferrari, May 28, 2009
    Oh, that's right...:D
     

Share This Page