456GT Seat handles | FerrariChat

456GT Seat handles

Discussion in '456/550/575' started by number46, Nov 8, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. number46

    number46 Karting

    Jun 21, 2005
    110
    London
    Has anyone re finished the black seat handle on the top side of each front seat that flips the back forward?? I am looking at doing this over the winter, maybe using plasticote rubberised spray.

    Any tips greatfully recieved.
     
  2. Bill17013

    Bill17013 Rookie

    Dec 21, 2013
    45
    Central PA
    Full Name:
    Bill Kramer
    To clean the handles I used a media blaster with fine glass beads that we use to surface aluminum parts. It works quickly and produces a satin like finish. I then painted them with a Rust-O-Leum paint. The color isn't quite right, but I couldn't find the Rust-O-Leum automotive black at the time. I plan to reprint them at some point, but the urgency has gone. They have been on the car for a few months and look great except for the color which is hard to notice. I use my car regularly.
     
  3. KeithS

    KeithS Karting
    Silver Subscribed

    Dec 30, 2008
    154
    Paradise Valley, AZ
    Full Name:
    Keith Stephens
    #3 KeithS, Nov 10, 2014
    Last edited by a moderator: Sep 7, 2017
    I refinished the seat and door handles but left a light brushed aluminum finish rather than black. The sticky stuff came off very easy with furniture refinisher. I used Old Masters but any brand would work. Compressed air blew out any residue in the corners, nooks and crannies. An abrasive pad on the faces provided the brushed look then clear lacquer. Getting the locking mechanism to function right took some tedious fussing but the project was quite straight forward.

    Keith
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  4. gsjohnson

    gsjohnson Formula 3

    Feb 25, 2008
    2,291
    Woodland Hills, CA
    Full Name:
    GS Johnson
    Looks good...So you just left off the window insignia etching?
     
  5. KeithS

    KeithS Karting
    Silver Subscribed

    Dec 30, 2008
    154
    Paradise Valley, AZ
    Full Name:
    Keith Stephens
    Don't understand the comment. There was no etching. The little lever in the door handle is the lock.

    Keith
     
  6. gsjohnson

    gsjohnson Formula 3

    Feb 25, 2008
    2,291
    Woodland Hills, CA
    Full Name:
    GS Johnson
    Sorry I meant to say the door lock has the word "Lock" with an arrow etched into it. I was asking if you just elected to leave that off after you refinished the lock/lever release?
     
  7. KeithS

    KeithS Karting
    Silver Subscribed

    Dec 30, 2008
    154
    Paradise Valley, AZ
    Full Name:
    Keith Stephens
    My car is a1999 456M. This may just be a model difference but the lock lever had no markings. It was just sticky black before refinish.

    Keith
     
  8. gsjohnson

    gsjohnson Formula 3

    Feb 25, 2008
    2,291
    Woodland Hills, CA
    Full Name:
    GS Johnson
    Ok I see. I didn't know the 456s lacked labels on their switches.
     

Share This Page