458 - vacuum pumps issue with power control wires | FerrariChat

458 - vacuum pumps issue with power control wires

Discussion in 'Technical Q&A' started by Gert Abildskov, Apr 19, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Gert Abildskov

    Apr 18, 2019
    3
    Full Name:
    Gert Abildskov
    Have been unlucky with a real **** experience.
    We changed the exhaust on my 458 and everything went perfectly smoothly, but of course the accident had to be out and the one wire that controls the vacuum pumps for the damper to hit the exhaust and be melted and short-circuited due to the heat.

    We have switched plugs and cannot find fuses or relays, so we can get the error rectified.
    It is a fuse or relay a place that needs to be changed ....I hope .......
    If we switch around connectors, damper control works perfectly .... It's the left side that creates the problem ....

    I hope you can help with wire diagram or solution.
     
  2. Motob

    Motob Formula 3
    Professional Ferrari Technician

    Nov 11, 2003
    2,238
    Frederick, Maryland
    Full Name:
    Brian Brown
    What are you talking about? What vacuum pumps are you referring to? What damper are you talking about, The dampers in the cars suspension?
     
    Qavion likes this.

Share This Page