488: 12v power source in engine area | FerrariChat
Buy

488: 12v power source in engine area

Discussion in '458 Italia/488/F8' started by F12_Tokyo, Jul 10, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. F12_Tokyo

    F12_Tokyo Rookie

    Jul 19, 2018
    19
    Full Name:
    Ken
    #1 F12_Tokyo, Jul 10, 2021
    Hi everyone

    Manage to work out a remote bypass fo the 488 exhaust valves. Problem is I need to tap into a 12v and can’t seem to find anything decent. Do you have any recommendations?

    Thank you!
     
  2. RayJohns

    RayJohns F1 Veteran
    Silver Subscribed

    May 21, 2006
    7,926
    West Coast
    Full Name:
    Ray
    #2 RayJohns, Jul 10, 2021
    Do you need power which is switched or always hot?

    You could perhaps tap into the power lead for the starter back there? Or maybe pull power off the battery tender wiring (I wold assume that goes pretty much straight back to the main positive lead).

    Ray
     
    F12_Tokyo likes this.
  3. F12_Tokyo

    F12_Tokyo Rookie

    Jul 19, 2018
    19
    Full Name:
    Ken
    #3 F12_Tokyo, Jul 10, 2021
    Ideally only when ignition is on. Thanks Ray.
     

Share This Page