5 ltr Espada/jarama engine | FerrariChat

5 ltr Espada/jarama engine

Discussion in 'LamborghiniChat.com' started by Chadbourn Bolles, Dec 23, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Chadbourn Bolles

    Chadbourn Bolles Formula Junior
    BANNED

    Aug 5, 2005
    820
    Leesville, SC USA
    Full Name:
    Chadbourn Bolles
    Anybody interested in a 5 ltr Espada/Jarama engine??. I have a crankshaft and can build an engine like that for you, Not that costly, and you get much more power and torque. There are other things that can be done also for more power, just ask.
    Chadbourn Bolles
    803 532 6257
     
  2. miurasv

    miurasv F1 World Champ

    Nov 19, 2008
    10,753
    Cardiff, UK
    Full Name:
    Steven Robertson
    Just out of interest are sandwich plates needed to add height to the cylinder block and longer liners needed for the pistons to run in to increase the stroke?
     
  3. Chadbourn Bolles

    Chadbourn Bolles Formula Junior
    BANNED

    Aug 5, 2005
    820
    Leesville, SC USA
    Full Name:
    Chadbourn Bolles
    I do not think so. Things like that can be compensated for with rod length and pin location.
    I have a Murcielago crank in a QV block using the same spacer place and end up with 409 cuin.
     
  4. miurasv

    miurasv F1 World Champ

    Nov 19, 2008
    10,753
    Cardiff, UK
    Full Name:
    Steven Robertson
    = 6.7 litre
     
  5. Chadbourn Bolles

    Chadbourn Bolles Formula Junior
    BANNED

    Aug 5, 2005
    820
    Leesville, SC USA
    Full Name:
    Chadbourn Bolles
    if you want to see what it looks like, go to forum Technical Q&A look for Lets Build an Engine Aug 15 2020 and you will see a pic of the engine, Now if I could just get it in the car. I have 3 customer cars to finish first. That is the way it goes.
     

Share This Page