550 hand/parking brake ratchet worn (photo) - part number?

I believe this will fit the 550, 456 and 355

P/N 66956100

https://www.eurospares.au/Parts/66956100/Ferrari

Image Unavailable, Please Login

but its currently on back order with no signs of whether it will be remanufactured

 

Unlikely to be remade unfortunately. The 'mechanism' part of the handbrake with the ratchet teeth is part 191634 - used on 456/550/575 and Enzo.

You could look for a used one - complete lever mechanism I would expect, or it's likely that something like 198375 (Mondial and TR) will have the same ratchet part in it. I guess also check the 'pawl' part that goes into the ratchet as well to see what state that is in.

 

It is indeed the same as the complete lever assembly is the same (full arm is PN 154095). What your appreciating is that Ferrari did not offer a separate main gear part for the 355 (aka you had to buy the whole/complete handbrake lever assembly for the 355).

PS Tell Dave Omar says hi

 

Hi Jaap,

I think you’re in the UK (like me)? If so Eurospares are breaking a 550 so may well have a used one coming up … drop them a line, they’re super helpful

John

 

Those were made for as I remember a recall. They were never intended to be a replacement part and I would not expect to see them made available again.. I happened upon a stash of them a few years ago and bought every one. The replacement part includes a handle if it is still available.

 

@JC1720 Every time a 550 dies a 575 gets its wings?

 

Or at least goes back to a last century shifter.