575 | FerrariChat

575

Discussion in '456/550/575' started by rodnro, May 24, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. rodnro

    rodnro Rookie

    Joined:
    Oct 8, 2015
    Messages:
    18
    Can any one help with pinouts (four plugs) on a 575 dashboard binnacle,thanks.
     
    rodnro, May 24, 2019
    #1
  2. stevepaa

    stevepaa Formula Junior Owner Silver Subscribed

    Joined:
    Apr 5, 2006
    Messages:
    771
    Location:
    san jose, ca
    Full Name:
    steve
    Any pics?
     
    stevepaa, May 31, 2019
    #2
  3. tazandjan

    tazandjan Three Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Jul 19, 2008
    Messages:
    39,195
    Location:
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    Probably the only people with that kind of info are at FAI. They may not give it to you, but they can definitely fix your instrument panel.

    Franchorchamps of America, Inc.
    935 Sunset Dr Suite A
    Costa Mesa, CA 92627
    (949) 631-6373



    Rod Drew

    [email protected]



    Will White

    http://www.ferrarioc.com/
     
    tazandjan, May 31, 2019
    #3
  4. rodnro

    rodnro Rookie

    Joined:
    Oct 8, 2015
    Messages:
    18
     
    rodnro, Jun 4, 2019
    #4
  5. rodnro

    rodnro Rookie

    Joined:
    Oct 8, 2015
    Messages:
    18
    The fault was no backlight,with ignition the high voltage circuit is supplied with two voltages,one about 10volts the other is a PWM controlled from the two rocker buttons on the dash.There was no output from the micro to drive the PWM circuit so i just biased that circuit on from the 5 volt regulator.It just means there is no brightness control of the backlight.No big deal.
     
    rodnro, Jun 4, 2019
    #5
  6. tazandjan

    tazandjan Three Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Jul 19, 2008
    Messages:
    39,195
    Location:
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    One way to do it as long as it does not blind you at night.
     
    tazandjan, Jun 4, 2019
    #6
  7. rodnro

    rodnro Rookie

    Joined:
    Oct 8, 2015
    Messages:
    18
    No,the customer is very happy.
     
    rodnro, Jun 5, 2019
    #7

Share This Page