87 TR Shaft Hub Worn | FerrariChat

87 TR Shaft Hub Worn

Discussion in 'Technical Q&A' started by jim94-348, Jan 10, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jim94-348

    jim94-348 Formula Junior
    Owner Silver Subscribed

    Aug 19, 2010
    981
    Greenville, NC
    Full Name:
    Jim
    #1 jim94-348, Jan 10, 2014
    Last edited by a moderator: Sep 7, 2017
    I have an 87 TR with knock off's that has a worn left hand rear wheel shaft hub. It looks like someone tried to fix it previously and didn't do a good job. There are high spots on the unit. I have attached a picture of what I need along with the drawing. It is part number 9 in the diagram. Has anyone fixed one of these at a machine shop or know where I can get it fixed? Also, does anyone have one at a reasonable price?

    Thanks!
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. wintech

    wintech Karting

    Jun 1, 2011
    206
    Perth WA
    Full Name:
    Pete K
    Hi Jim,
    did you resolve the issue with yr hub and high spots?

    Pete
     
  3. jim94-348

    jim94-348 Formula Junior
    Owner Silver Subscribed

    Aug 19, 2010
    981
    Greenville, NC
    Full Name:
    Jim
    I haven't completely finished it but I did buy a used replacement from FerrParts. If I can ever get these guys to ship it as they keep promising I should have one. It turns out that the problem was the hub that bolts to the rim even though the shaft appeared worn. When I couldn't find a repair place I used the opposite wheel hub and the fit was okay so I just need the hub.

    Ferrparts has promised to ship it multiple times and outright lied that it had shipped. I will avoid these guys like the plague in the future.
     

Share This Page