99 Diablo - Rubber boots on bumper... | FerrariChat

99 Diablo - Rubber boots on bumper...

Discussion in 'LamborghiniChat.com' started by BAKY, Jul 29, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BAKY

    BAKY Formula 3

    May 23, 2007
    1,296
    USA
    Full Name:
    Bobby
    Whats the best way to keep the 2 black rubber boots from coming loose on the rear bumper...is there a special type of glue or do I need to replace them...1 is ok and the other seems to have seperated from against the car.
    Thanks in advance for you help.
     
  2. Shamile

    Shamile F1 Veteran

    Dec 31, 2002
    6,712
    Lakeland FL
    Full Name:
    Shamile
    Hey there,

    I have the same problem on my roadster. One boot is fine but the other one is coming off. I find they warp and degrade over time with all that exhaust heat. They are not glued in but the rubber has a lip that allows it to slip in and hold.

    Lambostuff.com sells them for about 75 each. The tough part is....how to get it on? ...bumper removal...yuc !


    Shamile

    Freeze...Miami Vice !
     
  3. BAKY

    BAKY Formula 3

    May 23, 2007
    1,296
    USA
    Full Name:
    Bobby
    Any other thoughts on this...we couldnt be the only 2 people with this problem....
     
  4. 2NA

    2NA F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 29, 2006
    18,221
    Twin Cities
    Full Name:
    Tim Keseluk
    If you can get the boots back in place, a small amount of "super glue" should hold them.
     
  5. gday

    gday Formula 3

    Sep 10, 2004
    1,086
    CA, USA - NSW, AUS
    Full Name:
    Mick
    Guess I'm not following this.... the boots have embedded metal strips that lock the boots into place???

    -mick
     
  6. Shamile

    Shamile F1 Veteran

    Dec 31, 2002
    6,712
    Lakeland FL
    Full Name:
    Shamile
    Hey y'all,

    No, the boot is made completely of "thin" rubber with a rubber lip on top and below. The bottom lip is "letting-go" ...rubber getting weak and disintergrating. If you pull on the boots, you will see the lip. I wouldn't recommend supper glue as that is painted body work there. Eventually they will get bad enough or you will finally go for that sport exhaust and the " while I'm in there " will set-in. :)

    Be carefull pulling on the boots, the accoridian seams are prone to tearing.


    Shamile


    Freeze...Miami Vice !
     
  7. gday

    gday Formula 3

    Sep 10, 2004
    1,086
    CA, USA - NSW, AUS
    Full Name:
    Mick
    Then maybe we have different boots.

    In addition to the lip, the corners have little rubber triangle extensions which "cover" the metal strips embedded within the rubber. Its the corners that keep the boot in place. If the rubber peels away from the metal strips you run the risk of them scratching the paint work.

    -mick
     
  8. topcarbon

    topcarbon F1 Rookie

    Nov 3, 2006
    2,605
    #8 topcarbon, Oct 24, 2007
    Last edited by a moderator: Sep 7, 2017
    +1


    Bumper removal is easy, takes about 30 minutes max. Once you take it off, you may not want to put it back on. And, problem solved, no need for the rubber boots.
    Image Unavailable, Please Login
     
  9. Pantera

    Pantera F1 Rookie

    Nov 6, 2004
    4,479
    Thats nice!.
     
  10. BULL RUN

    BULL RUN Formula 3

    Dec 18, 2004
    1,684
    Leave well enough alone and live with the boots, not worth trying for perfection on that.
     

Share This Page