A/C compressor on its way out | FerrariChat
Buy

A/C compressor on its way out

Discussion in '360/430' started by Jagbuff, Apr 11, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Jagbuff

    Jagbuff Formula 3

    Jan 13, 2004
    2,267
    Site of US F1 Race!
    Full Name:
    Franck
    #1 Jagbuff, Apr 11, 2011
    Intermittently the A/C compressor makes a knocking noise (similar to a poorly adjusted lifter) when is it engaged. The clutch bearing is fine so I assume it is internal to the compressor, so new compressor needed (before it blows!)

    I found a couple of older threads about rebuilding but no equivalent replacement through a generic Dephi part, has anyone recently hit pay dirt? $2K is a little steep for me. Any recommendations on a good rebuilder?

    Also, any pointers on removing the compressor from the car? Accessibility appears OK from below, though a couple of bolts seem quite challenging....comments? suggestions?
    THX
    FRG
     
  2. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,206
    Mount Isa, Australia
    Full Name:
    Pap
    #2 PAP 348, Apr 11, 2011
    As you are probably well aware, PLEASE dont use the a/c till you replace the compressor mate. :D:D

    You dont want any failed compressor parts through your a/c system. I only had to clean out an and repair an a/c system at work the other day. Took me all day flushing lines etc.etc. just to get the metallic-sludge out of the the hoses. :D:D

    I carried it over to finish cleaning the evaporator and condensor. New compressor was being fitted as the old one failed internally and sent metal sludge right through the system. :D:D

    If anyone can supply me the original "Ferrari part" number I will see if I can match up the compressor from one of my contacts. :):)
     
  3. Jagbuff

    Jagbuff Formula 3

    Jan 13, 2004
    2,267
    Site of US F1 Race!
    Full Name:
    Franck
    #3 Jagbuff, Apr 11, 2011
    Last edited by a moderator: Sep 7, 2017
    Thanks PAP, yes the switch is in the off position but the temp is rising here in Texas so I need to fix soon. The ferrari part number is 180041. I have attached a couple of (poor) pictures of the compressor label. I believe it's a Delphi unit and this is what I deciphered off the label

    SAE J369
    Part 6581290
    Code 060630227

    Thanks in advance for your help.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  4. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,206
    Mount Isa, Australia
    Full Name:
    Pap
    #4 PAP 348, Apr 12, 2011
    Cool man, I will look into directly and let ya know if I have a win! :D:D

    I tried sourcing a 430 compressor for another FChatter, but didnt have any luck. :(:(

    I will see what I come up with. :D:D
     

Share This Page