A/C Console | FerrariChat
Buy

A/C Console

Discussion in '348/355' started by fxdwgs, Aug 15, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. fxdwgs

    fxdwgs Formula 3

    Aug 22, 2006
    1,016
    Sjobo, Sweden
    Full Name:
    Bengt
    #1 fxdwgs, Aug 15, 2007
    Last edited by a moderator: Sep 7, 2017
    Just taken that crap apart again for the 5th time. I have come to the conclusion there is nothing wrong with the electronics, it has to be in the cables supporting the fan assembly.
    Have to look into that some other day though.
    For those of you who want to see what that console looks like inside here are a few shots.
    Please not the electronic engineer who I used as consultant.......the last picture.

    //B//
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,973
    MD and NE
    Full Name:
    Robbie
    #2 285ferrari, Aug 15, 2007
    Your consultant would cetainly have a better guess than me for what is the problem..
     
  3. No Doubt

    No Doubt Seven Time F1 World Champ

    May 21, 2005
    72,740
    Vegas+Alabama
    Full Name:
    Mr. Sideways
    #3 No Doubt, Aug 15, 2007
    Is that a Bosch part number that I see on one PCB?
     
  4. Armenhaz

    Armenhaz Karting

    Nov 8, 2005
    232
    Glendale, CA
    Full Name:
    Armen
    #4 Armenhaz, Aug 15, 2007
    Did your A/C console just come off the face plate? MY A/C console seems to be stuck (seems like it was glued on?), and I am afraid of pulling on it b/c the face plate seems so flimsy, it might break.
     
  5. Chiaro_Slag

    Chiaro_Slag F1 Veteran

    Oct 31, 2003
    7,789
    CA
    Full Name:
    Jerry
    #5 Chiaro_Slag, Aug 15, 2007
    Kitty is in ur Pherrari phukin with da A/C n' chit.
     
  6. glpellegrino

    glpellegrino Karting

    Oct 21, 2005
    85
    Eastern Mass
    Full Name:
    Greg
    #6 glpellegrino, Aug 15, 2007
    My clock buttons recently broke loose inside and I had to take it apart to put the screw holding the internal LED backcover back in. The console is held to the face with a gummy double sided gasket that breaks loose with consistent but gentle pressure from a thin blade or screw driver. Be careful...the faceplate is very thin and I imagine easy to break with too much pressure in one place. Came apart pretty easy once I figured out it wasn't actually glued.
     
  7. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,224
    Mount Isa, Australia
    Full Name:
    Pap
    #7 PAP 348, Aug 15, 2007


    Lol!!! :):)
     
  8. potxoli

    potxoli Formula 3

    Mar 22, 2007
    1,716
    Washington DC
    Full Name:
    Eric B.
    #8 potxoli, Aug 15, 2007
    +1. Kitty needs to go :) :)
     
  9. fxdwgs

    fxdwgs Formula 3

    Aug 22, 2006
    1,016
    Sjobo, Sweden
    Full Name:
    Bengt
    #9 fxdwgs, Aug 16, 2007
    What is a PCB???

    //B//

     
  10. fxdwgs

    fxdwgs Formula 3

    Aug 22, 2006
    1,016
    Sjobo, Sweden
    Full Name:
    Bengt
    #10 fxdwgs, Aug 16, 2007
    Yep it is glued on.........however it came off nice. It is glued on top and bottom............not on the sides and not in between.

    //B//


     
  11. fxdwgs

    fxdwgs Formula 3

    Aug 22, 2006
    1,016
    Sjobo, Sweden
    Full Name:
    Bengt
    #11 fxdwgs, Aug 16, 2007
    She is not phukin around.......merely keeping me company. Guess she understands as much as I do of this A/C working only when it decides to.

    //B//


     
  12. fxdwgs

    fxdwgs Formula 3

    Aug 22, 2006
    1,016
    Sjobo, Sweden
    Full Name:
    Bengt
    #12 fxdwgs, Aug 16, 2007
    Might be more correct to explain it this way. There was a thin string of sticky "material" which I translated as glue. Probably is some kind of tape though. Sorry.

    //B//


     
  13. No Doubt

    No Doubt Seven Time F1 World Champ

    May 21, 2005
    72,740
    Vegas+Alabama
    Full Name:
    Mr. Sideways
    #13 No Doubt, Aug 16, 2007
    Printed circuit board...the large green objects!
     
  14. fxdwgs

    fxdwgs Formula 3

    Aug 22, 2006
    1,016
    Sjobo, Sweden
    Full Name:
    Bengt
    #14 fxdwgs, Aug 16, 2007
    PCB in this country means something very toxic. PCB in water is dangerous for the fish industry. A cod poisoned with PCB looks like something else....completely.

    Which number is a Bosch number?

    //B//


     
  15. Chiaro_Slag

    Chiaro_Slag F1 Veteran

    Oct 31, 2003
    7,789
    CA
    Full Name:
    Jerry
    #15 Chiaro_Slag, Aug 16, 2007
    :)

    Just kidding around. I like the pic of the kitty. I'm not so fond of the 348 A/C Italian craftsmanship.
     
  16. wingfeather

    wingfeather F1 Rookie

    Feb 1, 2007
    3,653
    rock bottom
    #16 wingfeather, Aug 16, 2007
    Last edited by a moderator: Sep 7, 2017

Share This Page