A Good Source for Metric Hardware ? | FerrariChat
Buy

A Good Source for Metric Hardware ?

Discussion in '308/328' started by newto308, May 1, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. newto308

    newto308 Karting

    Mar 20, 2007
    92
    McLean, Virginia
    Full Name:
    Chris
    #1 newto308, May 1, 2010
    Does anyone know a good source for metric hardware ? I need to replace two of my water pump housing studs (8mm X 75mm), and I also need to replace two of the 8mm X 120mm Bolts/Locknuts on my ring gear bell housing.

    These need to be automotive grade (heat treated) hardware. Does anyone know of a supplier ?

    ......Chris
     
  2. Mfoncerrada

    Mfoncerrada Formula Junior

    Dec 20, 2009
    419
    Monterey, CA
    Full Name:
    Miguel Foncerrada
    #2 Mfoncerrada, May 1, 2010
  3. 330gt

    330gt Formula 3

    Nov 12, 2004
    2,099
    Seattle, WA
    Full Name:
    Kerry Chesbro
    #3 330gt, May 1, 2010
    More extensive inventory than McMaster is Metric & Multistandard Components Corp.
    (http://www.metricmcc.com), though higher minimum quantities.
     
  4. Paul_308

    Paul_308 Formula 3

    Mar 12, 2004
    2,345
    #4 Paul_308, May 1, 2010
  5. Papa G

    Papa G Formula 3

    Dec 29, 2003
    1,406
    #5 Papa G, May 2, 2010
  6. pdmracing

    pdmracing Formula Junior

    Feb 14, 2007
    755
    atlanta
    #6 pdmracing, May 2, 2010
    here is amy secret for harware: catapillar heavy equipment dealers, They have everything you could possibly imagine in stock, all grade 8 and 3 different platings cad,black & natural.12 point, 6 point, hex head left hand threads , smaller heads for access, you name it, its unreal
    & BTW for pennies compared to anyone
    they can also make up any hose & end you can imagine, 3000 psi is nothing for those earth movers. the best part...Union employees who will take hours to find just what you need:),
    I even found a metric turnbuckle that I used for a clutch adjustment piece when ferrari wanted 100$ for the factory part that was backorder. Its been in the car 15 years now.
     

Share This Page