355 - About wheel installing | FerrariChat

355 About wheel installing

Discussion in '348/355' started by Filippo7673, Jan 10, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Filippo7673

    Filippo7673 Rookie

    Joined:
    May 19, 2013
    Messages:
    19
    Location:
    New York
    Full Name:
    Filippo Barone
    Filippo7673, Jan 10, 2020
    #1
  2. 2NA

    2NA F1 World Champ Consultant Owner Professional Ferrari Technician

    Joined:
    Dec 29, 2006
    Messages:
    18,221
    Location:
    Twin Cities
    Full Name:
    Tim Keseluk
    It's not uncommon for the bolt with the projecting pin to interfere with some aftermarket wheels. One or both can be removed if necessary.
     
    2NA, Jan 11, 2020
    #2
  3. Filippo7673

    Filippo7673 Rookie

    Joined:
    May 19, 2013
    Messages:
    19
    Location:
    New York
    Full Name:
    Filippo Barone
    Really ty just was not sure what they were for im new to the ferrari world


    Sent from my iPhone using FerrariChat.com mobile app
     
    Filippo7673, Jan 11, 2020
    #3
  4. 97 Spider

    97 Spider Formula 3

    Joined:
    Dec 15, 2012
    Messages:
    2,241
    Location:
    Texas
    Full Name:
    Brian
    They are just there to keep the rotors lined up with your threaded lug bolt holes. If when installing your rim and the rotor turns on the hub it can be very frustrating getting it lined up again and a lug bolt started. If you use the wheel installation pins from a company like Sticky RX then it makes it easy and keeps everything aligned.
     
    97 Spider, Jan 11, 2020
    #4
  5. kenneyd

    kenneyd Formula 3

    Joined:
    Sep 30, 2014
    Messages:
    2,032
    Location:
    NE FL
    Full Name:
    Ken
    Mine has rubber grommets on them, they don't seem to clear my challenge wheels. So I removed them before installing those wheels
     
    kenneyd, Jan 11, 2020
    #5

Share This Page