AC clutch hub wanted | FerrariChat

AC clutch hub wanted

Discussion in '308/328' started by dwhite, Jul 25, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dwhite

    dwhite F1 Rookie

    I know this is a tough one, but does anyone have or know someone who has an original clutch hub( the piece which locks against the pulley when the magnet is energized). My pulley is fine I am looking for the outer piece. Any help would be appreciated.

    I'm aware of the sanden units and if I can find what I need my AC will be back to working great.

    Thanks for any leads, info.
     
  2. bitsobrits

    bitsobrits Formula Junior
    Rossa Subscribed Silver Subscribed

    Nov 12, 2011
    740
    Omaha, NE area, US
    Full Name:
    Steve
    Isn't it just a York style compressor? Used on many brands of cars in the '60s-'70s. Perhaps one of the muscle car forums could help?

    It would help the search if you have the model number from the tag on the compressor to ensure parts compatibility.
     
  3. smg2

    smg2 F1 World Champ
    Sponsor

    Apr 1, 2004
    16,329
    Dumpster Fire #31
    Full Name:
    SMG
    York compressor, but clutch and pulley are unique to Ferrari.
     
  4. bitsobrits

    bitsobrits Formula Junior
    Rossa Subscribed Silver Subscribed

    Nov 12, 2011
    740
    Omaha, NE area, US
    Full Name:
    Steve
    Ah, good to know. Odd they would do that, but not really surprising.
     
  5. dwhite

    dwhite F1 Rookie

    Yep. I've even tried ordering other york clutch assemblies to just use the clutch hub but they are larger 5.7 vs 5.1 inches on ours and not exact in the other areas. One was close but no cigar.

    The parts folks say they have them but they look like what I've ordered and they all have twin v-groove pulleys. I don't think they are correct and no one has pictures. Need what's puctured Image Unavailable, Please Login Image Unavailable, Please Login
     
  6. dwhite

    dwhite F1 Rookie

  7. Sergio Tavares

    Sergio Tavares Formula 3

    Nov 15, 2018
    1,308
    Full Name:
    Sergio Tavares
    Are you looking for the Bonaldi clutch part that mounts to compressor chassis and has one wire?
    Is this because you want the front face to appear correct? There is complete new one in black but slightly smaller so not compatible for only one side, you must install full two parts and you will not have the face only black one
     
  8. dwhite

    dwhite F1 Rookie

    I found a used one. Thanks for the responses.
     
    Sergio Tavares likes this.
  9. dwhite

    dwhite F1 Rookie

    It's all back together and working perfectly. Ice cold AC again, yea! I hardly ever use it.
     

Share This Page