Add a Subwoofer Amp for Hi-Fi Stereos from Scuderia Audio | FerrariChat

Add a Subwoofer Amp for Hi-Fi Stereos from Scuderia Audio

Discussion in 'FF/Lusso' started by SoftwareDrone, Jul 30, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. SoftwareDrone

    SoftwareDrone F1 Veteran
    Sponsor Owner

    Jan 19, 2004
    7,860
    San Jose, California
    Full Name:
    Mike
    Here is my new 100% plug and play "add a subwoofer amplifier" amp/harness system.
    PM me for special Ferrari Chat pricing before these products make it to my website.
    Thanks.


     
    Blow N By and colorfull like this.
  2. SoftwareDrone

    SoftwareDrone F1 Veteran
    Sponsor Owner

    Jan 19, 2004
    7,860
    San Jose, California
    Full Name:
    Mike
    Sorry for the obsolete link above. I modified the video to show a complete virtual install (i.e. how to connect the harness at both ends) to better show the ease of installation.

     
    camshaft and ANOpax like this.
  3. Eric360

    Eric360 Formula 3

    Jan 11, 2010
    1,428
    San Francisco, CA
    Full Name:
    Eric
    Hey Mike, will this work on my F12 (with no upgraded amp option) and the Mosconi amp?
     
  4. tobymax

    tobymax Rookie

    Nov 1, 2009
    47
    Franklin, MI
    Did you replace the OEM amp on your F12? I need to replace mine.
     
  5. SoftwareDrone

    SoftwareDrone F1 Veteran
    Sponsor Owner

    Jan 19, 2004
    7,860
    San Jose, California
    Full Name:
    Mike
    Sorry for the delay.
    The F12 without the upgraded stereo option has no amp. The NIT is the same as the no hi-fi California and the no hi-fi Italia. I have the harness you need. You unplug your car harness from the NIT, plug my harness into the NIT, then plug your car harness into my harness. This separates out the speaker wires that extend in and out of the Mosconi amp. Additionally, my harness includes an accessory wire (for amp turn on). What you would need to provide is power and ground for the Mosconi amp as the NIT does not provide this.

    Any F12 with the factory hi-fi option has the large, 4 connector JBL "Professional" amplifier. I also have a harness for this amp that includes speaker input/output, power, ground and amp turn on. However, you would need to run the signals through a KEYLOK before proceeding into the amplifier. This is basically the same system that I sell for the 488 with the JBL option.
     
  6. Eric360

    Eric360 Formula 3

    Jan 11, 2010
    1,428
    San Francisco, CA
    Full Name:
    Eric
    Awesome! I will get that from you ASAP. I knew I waited for a reason. LOL

    Eric
     
  7. Eric360

    Eric360 Formula 3

    Jan 11, 2010
    1,428
    San Francisco, CA
    Full Name:
    Eric
    Update on my F12 stereo upgrade. I don't have the factory hi-fi option so the standard sound system is basically garbage. I didn't want a mega system so I purchased an excellent set of Focal speakers and Mosconi amp from Software Drone (Mike). Mike also made a custom harness for my F12 NIT Infotainment head unit for plug and play functionality.

    At first, the harness he made had the wrong plug, but he instantly made another one and sent it out the next day! What service!

    So my buddy and I decided to tackle the install. As you would expect, it's not as easy as it sounds to take apart the doors to replace the speakers. But with a little elbow grease, we got it done. Mike's harness worked perfectly and made things super easy. We installed the system and it sounds 100X better than the stock stuff. However, it wasn't perfect to my liking, so Mike came to the rescue. He was able to help me figure out that my iPhone bluetooth connection was playing at a really high volume level, this created some distortion when you turned it up. So we corrected that and it sounds great now!

    So kudos to Mike who was super helpful with the equipment and to get the system operating correctly. He knows his stuff and takes great care in his customers.
     

Share This Page