Advice sought - tyre valve | FerrariChat

Advice sought - tyre valve

Discussion in 'Technical Q&A' started by IanOgden, Aug 14, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. IanOgden

    IanOgden Rookie

    May 28, 2005
    9
    Ibiza
    Hi Guys

    Im stuck on an island off spain - Ibiza. I went to check the tyre pressure on my 550 and the tyre valve snaped right off - instant flat tyre.

    My problem is that there are no specialist tyre shops on the island. The valve looks differet to the norm - am I right or just being paranoid

    Is replacing it a job to be trusted to a local garage or should I have the car collected and trucked to barcelona at great cost !
     
  2. Schatten

    Schatten F1 World Champ
    Owner

    Apr 3, 2001
    11,238
    Austin, TX
    Full Name:
    Randy
    Is this your only mode of transportation? You might be better off shipping the wheel over to a reputable shop. Even if a local can do it, chances are - they will scratch the rim itself.

    The tire just needs to be dismounted, a new valve put in and remounted. Simple process, but the quality of the machine and the installer will determine if you get a scratched wheel or a broken bead on the tire.
     

Share This Page