Will these fit on a 1992 Ferrari Mondial T Cab Rim Diameter: 18 Rim Material: Alloy Offset: Front 31.5 Rear 38.95 Rim Width: Front 7.5 Rear 10 Bolt Pattern: 5x108
Well, since no one answered, I'll blather on a bit... though I know little about this. First, I would be concerned with interference with the fender lips as well as clearance on the inside with the 10" rears. Also, hub dia. is something you must consider for fitment. I'd recommend using one of the online calculators to see what might work. You will need to take some measurements to see what kind of clearances you have with your current tires/wheels. Then, knowing your current clearances, you can plug in offsets and tire sizes and see where things end up relative to the stock configuration. There are many such calculators, I like the one over at corvettecentral. The geometry can change your wheel bearing loads... loading gets worse as the tires move out away from the center of the car. Check out this thread: http://www.ferrarichat.com/forum/ferrari-discussion-not-model-specific/8361-modern-ferrari-wheel-offsets.html for OE data and more. Search function will reveal what others have put on their Mondials.
