360 - Aftermarket or rebuilt clutch for manual 360/CS | FerrariChat
Buy

360 Aftermarket or rebuilt clutch for manual 360/CS

Discussion in '360/430' started by collegeboy, Jul 22, 2025 at 7:18 PM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. collegeboy

    collegeboy Formula 3

    Aug 25, 2007
    1,369
    Texas and Kaua’i
    Full Name:
    Mikey
    #1 collegeboy, Jul 22, 2025 at 7:18 PM
    Since I might have clutch fluid on my clutch disk, I might need to replace it. Out of curiosity, are there any better clutches or flywheels out there other than stock? The stock unit is fine, so I have no problem sticking with that, but if there is something better for a manual car, now would be the time to install it. Also, how are these rebuilt clutches? Are they as good as OEM or better? Or junk?

    Kevlar clutch and flywheel service is only $1,580. OEM rebuild and flywheel service is only $980. That's cheap. It has my interest at a minimum.

    PEGA Ferrari 360 Modena Clutch Disc oe Set 201680 | GTE Engineering Online Shop

    Thanks
     
  2. imahorse

    imahorse F1 Rookie
    Silver Subscribed

    Nov 25, 2017
    4,347
    WI
    Full Name:
    Dustin
    #2 imahorse, Jul 22, 2025 at 8:13 PM
    I have yet to hear anything positive on aftermarket clutches for these cars.
     
    collegeboy likes this.
  3. WantaF430

    WantaF430 Karting
    Silver Subscribed

    May 10, 2023
    171
    Fort Worth
    Full Name:
    Joseph (Joe)
    #3 WantaF430, Jul 22, 2025 at 10:00 PM
    I've got maybe 500 miles on manual 430 "stage 2". No complaints, but also nothing to compare it to as far as function/feel.
     
    collegeboy likes this.

Share This Page