News

Aftermarket Wheels for a 348

Discussion in '348/355' started by albert328gts, Mar 6, 2009.

  1. albert328gts

    albert328gts Formula 3
    Silver Subscribed

    Oct 31, 2003
    1,507
    California
    #1 albert328gts, Mar 6, 2009
    Last edited: Mar 6, 2009
    I have an opportunity to pick up a set of Speedline modular wheels for my 348, I was told they were off a 355. I have been told that The Front Wheels are 18"x8.5 ET-55mm and the Rears Wheels are 18"x10 ET-55mm. Am not sure if these measurement are accurate, my question is will they fit a 348 with the specs given. And lastly, I see many 348's on this board that have 360 Modular Wheels, I had tried those on my car at one time, no issue with the front, but the rear stuck out so much, I could not bare it. Does anyone know if those that have 360 Modular wheels had them shaved down?
     
  2. To remove this ad click here.

  3. albert328gts

    albert328gts Formula 3
    Silver Subscribed

    Oct 31, 2003
    1,507
    California
    Any help would be appreciated.
     
  4. BT

    BT F1 World Champ
    Lifetime Rossa

    Mar 21, 2005
    14,841
    FL / GA
    Full Name:
    Bill Tracy
    I can't believe they would have a negative ET. That would be a very deep dish, especially on the rear wheels.
    Send a PM to DrT. He has challenge wheels on his 348, and I think he knows the offsets.
    BT
     
  5. albert328gts

    albert328gts Formula 3
    Silver Subscribed

    Oct 31, 2003
    1,507
    California
    Thanks, I will do that.
     
  6. vvassallo

    vvassallo F1 Veteran

    Aug 4, 2006
    8,213
    Palos Verdes
    Full Name:
    Vince V
    darkaangel has 360 wheels on his Spider. Check with him. I think they look great, much better in person than in pictures.
     
  7. To remove this ad click here.

  8. Saint Bastage

    Saint Bastage F1 Rookie

    Jun 1, 2007
    2,548
    Connecticut
    Full Name:
    Lane
    #6 Saint Bastage, Mar 8, 2009
    Last edited by a moderator: Sep 7, 2017
    I have a set of Highline wheels obtained from a 360. They do NOT clear the calipers in the front and needed a small (3/16) shim plate to work. Rears were fine.
    Image Unavailable, Please Login
     
  9. 355dreamer

    355dreamer F1 World Champ
    Rossa Subscribed Owner

    Apr 3, 2006
    10,088
    DC Metro
    Full Name:
    L.C.
    I have a set of stock 355 wheels which fit the 348 quite nicely and look the best IMHO. PM me if you are interested.
     
  10. Night life

    Night life F1 Veteran
    Rossa Subscribed

    Dec 1, 2007
    6,651
    The city that rhymes with fun in Canada
    Full Name:
    Roberto Giannini
    #9 Night life, Mar 9, 2009
    Last edited by a moderator: Sep 7, 2017
  11. To remove this ad click here.

Share This Page