Air Bag and Shock Absorber on after removing dash | FerrariChat
Buy

Air Bag and Shock Absorber on after removing dash

Discussion in '348/355' started by V VA ENZO, Mar 16, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. V VA ENZO

    V VA ENZO Rookie

    Jul 21, 2009
    1
    #1 V VA ENZO, Mar 16, 2013
    I removed the instrument binacle to replace dash light rheostat and after reinstalling binacle the air bag and shock warning lights stay on. We reset the following pending errors, P1448, P1447, and P1691 and lamps are still on.
     
  2. cactussed

    cactussed Formula Junior

    Mar 12, 2008
    298
    #2 cactussed, Mar 18, 2013
    Any luck sorting this out?
     
  3. cactussed

    cactussed Formula Junior

    Mar 12, 2008
    298
    #3 cactussed, Mar 22, 2013
    Anyone?
     
  4. bobzdar

    bobzdar F1 Veteran

    Sep 22, 2008
    6,916
    Richmond
    Full Name:
    Pete
    #4 bobzdar, Mar 22, 2013
    Dunno, I took apart my gauge binnacle to fix the stickies and my shock light is on now as well (but not other lights). I was planning to troubleshoot this weekend.
     
  5. cactussed

    cactussed Formula Junior

    Mar 12, 2008
    298
    #5 cactussed, Mar 22, 2013
    Let me know how you get on.
    I did the same but started and moved the car witout the instrument binnacle in and now both my lights are on which is annoying.
     
  6. SoCal1

    SoCal1 F1 Veteran
    Owner Silver Subscribed

    Jun 14, 2011
    8,636
    SoCal LA/OC/New Mexico
    Full Name:
    Tim Dee
    #6 SoCal1, Mar 22, 2013
    From what I remember (memory sucks) P1691 is an open circuit. Broken wire bad ground blown bulb possibly CEL bulb

    Might be a place to start
     
  7. fatbillybob

    fatbillybob Two Time F1 World Champ
    Consultant Owner

    Aug 10, 2002
    29,234
    socal
    #7 fatbillybob, Mar 22, 2013
    I guess note to self would be to disconnect battery before doing this.
     
  8. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #8 Dave rocks, Mar 22, 2013

    And leave it off until all is back assembled?
     
  9. JoshECS

    JoshECS Formula Junior
    BANNED

    May 3, 2010
    433
    Ashburn,VA
    Full Name:
    Josh Hill
    #9 JoshECS, Mar 22, 2013
    If you had the ignition on while the cluster was out, the only way to clear the airbag light is with a diagnostic tool. You will need an SD2 or SD3. The Leonardo seems to be having a communication issue with the airbag systems in these earlier cars.
     

Share This Page