air box flex intake hose

Dude,

Dons flame suit.....

I hate to thell you this but a 4 inch calder coupling is what the po installed when the stock bellows took a s**t. Not pretty but will certainly do the trick.

All of the concourse guys are probably sticking pins in my effigy or elsewhere, voodoo permitting.

with all due humility, (snicker),
chris

 

Got any photos and a source?

 

Birdman started the thread and I thought I had a line on a guy who was going to make a replica for a lot less money. That did not turn out as planned and I have given up for the moment. For my car I'm using a short piece of 4 inch aircraft scat tubing. It's an ugly orange, but it does a good job without collapsing. Also it's easy to shape and fit onto the fittings. Scat tubing can be gotten at most any aircraft supplier like Chief's or Aircraft Spruce.

There's probably an old picture of what I'm using if you search the old files that Birdman started.

Bob Wassam

 

I don't know what car you have as you haven't filled in your profile, but you could try here:

http://www.superformance.co.uk/a-308/carb.htm