Air-Brush for model making recommendations???

Here's a thread from the F1 modeling forums that's pretty good:

http://www.f1m.com/main/forum/viewtopic.php?f=6&t=12335

A quick search for "airbrush" in here will also yield some good results.

Cheers,
Ian

 

I don't personally airbrush models, but I used to airbrush.
Personally I wouldn't touch anything that's not gravity fed. It's going to make your life a hell of a lot easier.

I like Badger products myself.

 

The majority of my built models are F1 versions. Those small 1/43 models require very fine coats of paint. Therefore an airbrush for me is a necessity.

However I also use some automotive paints in spray-cans sometimes.
My recommendation, do not buy a cheap airbrush, you be sorry afterwards.

wolfman

 

Check out Iwatas, Eclipse and Revolution are both fine and relatively cheap models.
Its hard to make a recommendation when you don't know what you going to be using it for.
Also, check www.dixieart.com, they are great supplier.

 

Cheap, relatively bulletproof, parts available everywhere, easy to use, available w/ different size tips and needles: Badger 150.

 

Hello Chicko,

So you are also an interested fan by following my Schumi thread.
Very much appreciated!

I use two air-brush guns, “Infinity” and “Evolution-Silverline”.
Both are made by a German manufacture, Harder & Steenbeck.
Those are widely spread throughout Europe.
There are many good airbrush guns available. I just happen to buy those two,
because they were raided very highly by some airbrush gurus, in an airbrush forum.

wolfman