My 15 years old compressor is on its last leg and I need to replace it. 30 gallons minimum 150 psi >6 cubic feet air flow runs on 120 or 240 (possible) and it has to be super quiet. I have been doing some research but I need a second/third opinion. Do you have any recommendations?
15 year life is worse than Harbor Freight quality. The motor number which makes a difference is rpm. 3450 rpm means cheap and loud. 1750 rpm are twice as expensive but last for centuries.
15 years old? It was probably American made and only needs a re-ringing. If it was a good brand it only needs rebuilding, not replacing.
+1. If you do need to replace - Ingersoll-Rand, 2-stage, 240 V, with water and oil traps. Not inexpensive, but do it right, once.
it was a Sears compressor. The motor is old and tired and keeps tripping the circuit breaker. It no longer reaches its maximum PSI rating. And it is loud as hell. I am done with that.
mine died last weekend. it was a 11 year old Sears or Harbor Freight, the decals were gone so I have no idea. i went to Home depot and bought the biggest portable one they had for $249.00 I think its a 26 Gal Husky. Should be good enough for what i need. Its MUCH quieter than my old one!
