air pump camshaft pulley vremoval | FerrariChat
Buy

air pump camshaft pulley vremoval

Discussion in '308/328' started by 4valve, Jul 22, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 4valve

    4valve Rookie

    May 6, 2005
    27
    Central Coast Calif.
    #1 4valve, Jul 22, 2008
    Last edited by a moderator: Sep 7, 2017
    Hey Everyone..... The pulley on the end of the camshaft that drives the air pump on my '83 QV isn't spinning. From previous post it apears that the shear pins have sheared. I will need to get it smogged in another year, so I eventually need to get it working. Has anyone here delt with R&R'ing the camshaft pulley, and/or replacing the shear pins?
    Image Unavailable, Please Login
     
  2. pad

    pad Formula 3

    Sep 30, 2004
    1,426
    Tequesta, FL
    Full Name:
    Paul Delatush
    #2 pad, Jul 23, 2008
    There is a tool that will allow you to remove the shear pin without removing the cam. Or you can make one - it lookslike the type of tool that is used to remove links from a motorcycle rear chain. If I remember correctly, you will need to remove the cam cover and the left-most cam retainer cap to get to it. FYI, my '83 did not have a shear pin and when I decided to remove the drive end, I had to cut it off.
     

Share This Page