Alfa 355 Project | FerrariChat
Buy

Alfa 355 Project

Discussion in '348/355' started by sevminasyan, May 14, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. sevminasyan

    sevminasyan Formula 3

    Jun 24, 2008
    1,156
    Glendale, CA
    Full Name:
    Steve
    #1 sevminasyan, May 14, 2011
    Could someone, anyone or maybe couple of you guys help me with a clearence numbers between the Gearbox crossmember and the ground? I am currently modifying my 355 suspension to fit in an Alfa GTV6 and forgot to take the measurement prior to starting my work. The shock towers need to move and dont want to weld them in too high or too low.
    Will post pictures once one side suspension is fully complete so you can see what mods go into converting a 1986 Alfa GTV6 into a mid engine Alfa 355.

    Couple of numbers from you guys will be better so I can average the clearance while the car is on the ground.

    Thank much
     
  2. Rob'Z

    Rob'Z Formula 3

    Mar 29, 2008
    1,024
    Tucson,AZ
    Full Name:
    Robert
    #2 Rob'Z, May 16, 2011
    I figured someone would have helped you out by now............

    I just went out to measure and my crossmember/bottom of clutch housing is 4.75" from the ground. My car is lowered a bit so I'd say 5.25" or slightly more is normal.

    Hope this helps.


    Rob
     
  3. sevminasyan

    sevminasyan Formula 3

    Jun 24, 2008
    1,156
    Glendale, CA
    Full Name:
    Steve
    #3 sevminasyan, May 16, 2011
    Thanks Rob

    That help quite a bid. If I help you any, please let me know with 355 parts.
     
  4. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,620
    The Brickyard
    Full Name:
    The Bad Guy
    #4 ernie, May 17, 2011
    Where are the under construction pics?
     
  5. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,787
    Ontario, Canada
    Full Name:
    Mike
    #5 AceMaster, May 17, 2011
    Last edited by a moderator: Sep 7, 2017
  6. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,620
    The Brickyard
    Full Name:
    The Bad Guy
    #6 ernie, May 17, 2011
    lol

    smartass
     
  7. fatbillybob

    fatbillybob Two Time F1 World Champ
    Consultant Owner

    Aug 10, 2002
    29,261
    socal
    #7 fatbillybob, May 17, 2011
    Hope to see it race with arosc.org
     
  8. sevminasyan

    sevminasyan Formula 3

    Jun 24, 2008
    1,156
    Glendale, CA
    Full Name:
    Steve
    #8 sevminasyan, May 17, 2011
    Hilarious sign :)
     
  9. sevminasyan

    sevminasyan Formula 3

    Jun 24, 2008
    1,156
    Glendale, CA
    Full Name:
    Steve
    #9 sevminasyan, May 17, 2011
    Do not have recent pics but two months ago did a post. I am sure you have already seen those. Tax season came by and got really busy. Have not had the time to progress enough to post more pics. All I have done from the last post is modify the right rear suspension to push the wheel in about 4 inches and give it a slight negative camber for the future wheel arch to go around the 80s 16 inch gotti wheels.
     

Share This Page