Another 348 aircon question | FerrariChat

Another 348 aircon question

Discussion in 'Technical Q&A' started by jonathannealeuk, Jun 17, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jonathannealeuk

    May 6, 2005
    24
    Falkirk, Scotland
    Full Name:
    Jonathan Neale
    My aircon switches on OK when I start up, but after about 20 seconds the readout changes to "E5".

    Does that indicate something special, or is it another connection/PCB issue?

    Thoughts on problems and solutions welcomed :)


    Jonathan
     
  2. Markie1949

    Markie1949 Karting

    Apr 4, 2005
    82
    Utah
    I'm not home, so I can't ref my manual, but a quick search reveals E5 "motor for heater valve control". I suggest first using the battery off trick. If that clears it then it was probably your standard 348 transitory problem and you just fixed it. If not then proceed to plan B, pull the a/c panel and apply Stablant 22a to the plug. Hopefully that will fix it, but plan C is that perhaps the heater valve motor is failing or has failed. Find it and stabalant all of it's connections. If that dosn't help, the motor may in fact be bad. Good luck, there's lots of info on working out 348 a/c problems in the archives.
     
  3. jonathannealeuk

    May 6, 2005
    24
    Falkirk, Scotland
    Full Name:
    Jonathan Neale
    Thanks I will give it a go and let you know the results of a,b and c!

    Jonathan
     

Share This Page