Any Recommended Clear Bra Installers ? | FerrariChat

Any Recommended Clear Bra Installers ?

Discussion in 'Chicago' started by LP400S, Sep 13, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. LP400S

    LP400S Formula 3

    Joined:
    May 18, 2002
    Messages:
    1,223
    Location:
    West Coast
    Looking for a good Chicago are clear film paint protection
    installers. Any recommendations? Thanks!!!
     
  2. adam76

    adam76 Karting

    Joined:
    Aug 28, 2008
    Messages:
    240
    Location:
    Chicago
    Full Name:
    Adam
    I HIGHLY recommend CGC (http://www.clearguardforcars.com) . He will do it on site (with the right space) or you can take it to him. Ive had 3 clear bras installed, and none came close to the quality of work that CGC did for me. He will do ALL my vehicles moving forward.
     
  3. blabardi

    blabardi Formula Junior

    Joined:
    Dec 4, 2007
    Messages:
    478
    Location:
    Downers Grove, IL
    I recommend Tim Kirlin dba The Plastic Surgeons in Burr Ridge. I've had these installed by several people but Tim did the one for my Ferrari and it is by far the best I've seen. PM me if anyone wants the number.
     
  4. LP400S

    LP400S Formula 3

    Joined:
    May 18, 2002
    Messages:
    1,223
    Location:
    West Coast
    Thanks guys I will give them both a try. I need a custom cut for a Daytona so I need someone that lnows what he is doing.
     
  5. jcpca356

    jcpca356 Rookie

    Joined:
    Sep 18, 2009
    Messages:
    22
    Location:
    chicago
    my guy does it very cheap. - did all my 3 cars. he'll come to your house. let me know if you're interested.
     
  6. adam76

    adam76 Karting

    Joined:
    Aug 28, 2008
    Messages:
    240
    Location:
    Chicago
    Full Name:
    Adam
    The guy I used (CGC) was a pin striper, so he has a steady, exact hand, and wont cut your paint. I had someone else do clear bra on one of my cars, they are redoing a 3rd time. Bubbles and debris under the clear, and worst of all, cant cut clean lines for ****. If they dont get it right this time, Im getting a refund, and having CGC do it, like I should have from day 1.
     

Share This Page