Any way to provide more space between gas and brake pedal/308? | FerrariChat
Buy

Any way to provide more space between gas and brake pedal/308?

Discussion in '308/328' started by greg328, Nov 23, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. greg328

    greg328 F1 Rookie

    Nov 17, 2003
    4,209
    Austin, TX USA
    Full Name:
    Greg
    #1 greg328, Nov 23, 2004
    My size 13's are finding it a very tight fit.......
     
  2. pma1010

    pma1010 F1 Rookie

    Jul 21, 2002
    2,559
    Chicago
    Full Name:
    Philip
    #2 pma1010, Nov 23, 2004
    Spacing is controlled by spacers on the pivot bar above the pedals. You can cut the spacers to move the pedal but you'll need to modify the brake light switch with a smaller tab on the brake pedal. It is a fair amount of disassembly to take the pedal box out, remove the roll pin, pull the pivot bar, cut the spacers, weld a tab and reassemble, but it can be done (I did mine for another purpose). You may also be able to heat and bend the brake pedal arm but you'd want to pull it either way.
    HTH
    Philip
     
  3. greg328

    greg328 F1 Rookie

    Nov 17, 2003
    4,209
    Austin, TX USA
    Full Name:
    Greg
    #3 greg328, Nov 23, 2004
    Thanks..... I might just have to carry some driving mocs in the car, but what a hassle....
     
  4. Dom

    Dom F1 Veteran
    Owner

    Nov 5, 2002
    8,489
    #4 Dom, Nov 23, 2004
    I believe ultimate pedals.com provides aluminum pedals that are smaller than the factory setup. This should give you more space.

    Dom
     
  5. greg328

    greg328 F1 Rookie

    Nov 17, 2003
    4,209
    Austin, TX USA
    Full Name:
    Greg
    #5 greg328, Nov 24, 2004
    thanks Dom. I'll check that out!
     

Share This Page