Anybody use Hardi Board siding on their house? | FerrariChat

Anybody use Hardi Board siding on their house?

Discussion in 'Other Off Topic Forum' started by bball16, Nov 24, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. bball16

    bball16 F1 Rookie Rossa Subscribed

    Joined:
    Dec 2, 2011
    Messages:
    4,129
    Location:
    NY LI FtL
    Full Name:
    Mike
    Want to put new siding on my house and I'm not into vinyl. Has anybody used this product?
     
  2. texasmr2

    texasmr2 Two Time F1 World Champ BANNED

    Joined:
    Oct 22, 2007
    Messages:
    22,232
    Location:
    Houston
    Full Name:
    Gregg
    We have Hardi Board on our house and we are satisfied, been on the house for at least 15yrs now I believe.
     
    Last edited: Nov 24, 2013
  3. Alcav5

    Alcav5 F1 Rookie Rossa Subscribed

    Joined:
    Jul 28, 2012
    Messages:
    4,083
    Location:
    Scarsdale, NY
    Full Name:
    Al
    My partner used it and loves it. I wish I had it. I have clapboard and if you don't keep up with it it will rot. Among other benefits, Hardi board won't rot I understand.
     
  4. UroTrash

    UroTrash Four Time F1 World Champ Consultant Owner

    Joined:
    Jan 20, 2004
    Messages:
    40,487
    Location:
    Purgatory
    Full Name:
    Clifford Gunboat
    Last edited by a moderator: Sep 7, 2017
  5. bball16

    bball16 F1 Rookie Rossa Subscribed

    Joined:
    Dec 2, 2011
    Messages:
    4,129
    Location:
    NY LI FtL
    Full Name:
    Mike
    It comes with a 15 year warranty on the paint. Has anybody experienced any wear in less time then that?
     
  6. Vinny Bourne

    Vinny Bourne Formula Junior

    Joined:
    Nov 25, 2011
    Messages:
    910
    Building a house is one of my goals and I have researched every aspect of the build in great detail. When it comes to siding, the best product in this category imo, is Nichiha Sierra Premium Shake. Much thicker and tougher than Hardiboard, also a lot better looking.
     
  7. bball16

    bball16 F1 Rookie Rossa Subscribed

    Joined:
    Dec 2, 2011
    Messages:
    4,129
    Location:
    NY LI FtL
    Full Name:
    Mike
    Is it made as a overlap plank?
     
  8. Vinny Bourne

    Vinny Bourne Formula Junior

    Joined:
    Nov 25, 2011
    Messages:
    910
    If you mean do you snap your lines starting at the bottom and nail one row of planks and then place the next row over the top of them for runoff (function) and shadow line reveal (look) all the way up the side of your house? Then Yes. 8' long and 9 1/4" high planks.

    My computer monitor is sitting on a sample of it that I have had for years. Not only what I have said already but on contractor forums years ago the reviews were best for this. I would advise doing all do diligence, because my project has been on a back burner and I have no idea how the financial collapse and housing implosion have affected this industry or company in particular.

    If this is new construction and you want any more info just say so as the siding is just 1 piece of a complete system.
     
  9. Face76

    Face76 F1 World Champ Rossa Subscribed

    Joined:
    Aug 21, 2006
    Messages:
    13,489
    Location:
    The Other Oz
    Full Name:
    M Wilborn
    Our house was built with the POS masonry board and has since been replaced with James Hardie board all the way around. We are satisfied with the product but had to change contractors early in the process because we were not satisfied with their work. I believe the installation is very important with these products.
     
  10. bball16

    bball16 F1 Rookie Rossa Subscribed

    Joined:
    Dec 2, 2011
    Messages:
    4,129
    Location:
    NY LI FtL
    Full Name:
    Mike
    I'm getting estimates now. I've seen the product installed on a number of home and I like the way it looks. Quotes seem to be coming in around 40k. They all seem to have about 20 square, but I have a ton of windows in the house that will need trim work.
     
  11. Face76

    Face76 F1 World Champ Rossa Subscribed

    Joined:
    Aug 21, 2006
    Messages:
    13,489
    Location:
    The Other Oz
    Full Name:
    M Wilborn
    That sounds a little high but in the right neighborhood. Make sure you understand the provisions of the warranty completely.
     
  12. bball16

    bball16 F1 Rookie Rossa Subscribed

    Joined:
    Dec 2, 2011
    Messages:
    4,129
    Location:
    NY LI FtL
    Full Name:
    Mike
    The warranty I spelled out pretty clearly. Manufacturer stands behind it for 15 years on the finish etc.. Everything I've read about the Hardi company seems positive. My son is an architect and he's doing some research on it now too.
     
  13. slm

    slm F1 Rookie Owner Rossa Subscribed

    Joined:
    Dec 5, 2004
    Messages:
    4,109
    Location:
    Near Lambeau field
    Full Name:
    Steve M
    My dad put it on his house on lake Michigan about 9 years ago and has held up very well. Stands up to 90+ degrees in the summer and -30 in the winter. Has a couple of boards lose color. Replaced without problem under warrenty. We have since put it on our home and lake house. Very pleased with the product
     
  14. Edward 96GTS

    Edward 96GTS F1 World Champ Silver Subscribed

    Joined:
    Nov 1, 2003
    Messages:
    11,099
    we used copper siding. develops a nice green patina. no maintenance required.
    ed
     
  15. bikerider

    bikerider Karting

    Joined:
    Feb 19, 2012
    Messages:
    122
    Location:
    Maryland
    have it on my house which was built in 2008. no sign of ware and no problems. we got the gray color - came pre-painted but I had the builder put a "field coat" on.
     
  16. bball16

    bball16 F1 Rookie Rossa Subscribed

    Joined:
    Dec 2, 2011
    Messages:
    4,129
    Location:
    NY LI FtL
    Full Name:
    Mike
    So far I like what I'm hearing...thanks
     
  17. Monza 456

    Monza 456 Karting

    Joined:
    Sep 15, 2005
    Messages:
    231
    Location:
    Portland, Oregon
    Full Name:
    Craig Nelson
    I used it five years ago and so far it's great.
     
  18. Face76

    Face76 F1 World Champ Rossa Subscribed

    Joined:
    Aug 21, 2006
    Messages:
    13,489
    Location:
    The Other Oz
    Full Name:
    M Wilborn
    Improper installation, which can be many things, can and will void the warranty. We fired the first installer for this reason.
     
  19. bball16

    bball16 F1 Rookie Rossa Subscribed

    Joined:
    Dec 2, 2011
    Messages:
    4,129
    Location:
    NY LI FtL
    Full Name:
    Mike
    I've only taken estimates from their certified installers. Hopefully that should negate that issue.
     
  20. 4re Nut

    4re Nut F1 World Champ

    Joined:
    Mar 27, 2004
    Messages:
    16,343
    Location:
    N of NOLA
    Full Name:
    Steve
    My previous employer used prefinished Hardi on a 200+ unit apt complex and several months later the bldgs looks like cheetahs and zebras, i.e. spotted and striped. The problem was the touch-up paint used at joints, replacement boards, etc. Though the touch-up paint matched when it was applied, it aged/faded/did something at a different rate than the factory finish thus the spots and stripes that appeared over time. Supposedly the subcontractor followed the touch-up procedures but the general contractor had to repaint every bldg (I'm not sure who ultimately paid the bill).

    No issues with the product otherwise but this might be a good idea if you go prefinished...

    ...but doublecheck the impact (if any) to the prefinish warranty.

    Below is an example of what I'm talking about. Disclaimer...I found this image via a Google search and this is neither the property nor the contractor/sub I'm referring to.
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
  21. bball16

    bball16 F1 Rookie Rossa Subscribed

    Joined:
    Dec 2, 2011
    Messages:
    4,129
    Location:
    NY LI FtL
    Full Name:
    Mike
    The seams don't look to good either.
     
  22. MarkJ

    MarkJ Formula Junior

    Joined:
    Sep 10, 2006
    Messages:
    729
    Location:
    NW Arkansas
    Full Name:
    Mark Jones
    I used Hardi Board Shakes on the home I built 7 years ago and am very pleased.
     
  23. Trey W

    Trey W Rookie

    Joined:
    Dec 27, 2009
    Messages:
    41
    Location:
    Northern Virginia
    Just to note with Hardie Plank, I have seen it many times (own a pressure washing company) the factory paint will get "sunburnt". The pigment breaks down and leaves and chalky oxidation on the surface. If agitated with a brush or pressure washer it will look horrible, trust me. We have restored and removed oxidation on some Hardie with our methods before but it is pretty difficult to get it to look new again.
     
  24. nathandarby67

    nathandarby67 F1 Veteran Owner

    Joined:
    Feb 1, 2005
    Messages:
    8,349
    Location:
    Mississippi
    Full Name:
    Nathan
    We have it on our house, and about 98% of the houses in our neighborhood have it. Overall I am happy. There are a couple of small spots in one area where the caulking around a window leaked and allowed moisture behind the board, and the color changed a bit in about a 2 square foot area on a couple of boards. It is not in a visible place so really doesn't bother me, and I haven't bothered looking into replacement. I would probably just touch up paint it if anything. There are one or two houses in the neighborhood (out of over 100) where I have noticed some "chalking" of the finish. These seem to be on the darker houses, so maybe there is a correlation there?

    As others have said, like in anything the quality of the installation is important. Even the best material can be screwed up by someone doing a sloppy job with it. I would stress using only the very best caulking at seams and joints. Spend as much money as you need to there, that's not the place to cut corners.

    This is the only pic I have with me, and it's more of the sunset than the house, but you can get an idea...ours is a medium gray color:
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017

Share This Page