Anyone have an f355 parts car? Need 2 clips please | FerrariChat

Anyone have an f355 parts car? Need 2 clips please

Discussion in '348/355' started by Redlyne_mr2, Jan 15, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Redlyne_mr2

    Redlyne_mr2 Formula Junior

    Aug 5, 2009
    462
    Calgary, Alberta
    Full Name:
    Ryan D
    My local dealer says nla, 131783 is the part number. The clip is located under each engine side cover in the engine bay. It holds the suspension actuator wire to the underside of each engine lid cover.

    Does anyone have one kicking around?

    thank you
    Ryan
     
  2. classicmini

    classicmini Rookie

    Apr 1, 2012
    32
    Kansas
    Full Name:
    Ararad
    These were broken on both of our 355's also, we ended up 3D printing a new set based on the old ones but made them stronger in our design. I can print up more if you are interested, PM me.
    We have printed quite a few NLA parts for different cars so if anybody is looking for something like that, send me a message and I can see if it is something we can do.

    Image Unavailable, Please Login
     
    Qavion and MAD828 like this.
  3. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    33,736
    Austin TX
    Full Name:
    Brian Crall
    Those are actually used on a number of models. If they can be made for a reasonable price I'd make a run of them and let people know.
     
  4. Ferrarium

    Ferrarium F1 Veteran
    Rossa Subscribed

    Jul 28, 2018
    5,624
    Central NJ
    Full Name:
    Eric
  5. johnk...

    johnk... F1 World Champ
    Owner

    Jun 11, 2004
    10,629
    CT
    Full Name:
    John Kreskovsky
  6. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    Both of those places list everything available, until you actual place an order and find out it's not.

    That would be a part very easy to urethane cast or make an aluminum mold and reproduce them.
     
    MAD828 likes this.
  7. johnk...

    johnk... F1 World Champ
    Owner

    Jun 11, 2004
    10,629
    CT
    Full Name:
    John Kreskovsky
    Only take a phone call. :) Pretty sure I got them from All Ferrari Parts.

    Also, if not worried about OE,

    https://www.alliedelec.com/essentra-components-whc-500-01/70209061/?mkwid=slbuED4Go&pcrid=30980760979&pkw=&pmt=&gclid=EAIaIQobChMIq-Gnx_D_3wIVVuDICh1pMg4pEAQYByABEgICv_D_BwE

    These come in various sized and I bet you can get something similar at any auto parts store.
     

Share This Page