Anyone in San Diego with Tools. | FerrariChat
Buy

Anyone in San Diego with Tools.

Discussion in 'Technical Q&A' started by kirk, Jun 14, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. kirk

    kirk Rookie

    Jan 27, 2004
    21
    San Diego, CA
    Full Name:
    Kirk Texeira
    #1 kirk, Jun 14, 2005
    I am R & R-ing the oil hoses on my 328; does anyone have a 34mm wrench, 36mm wrench, and a 32mm 6pt socket? If you are willing to let me borrow or rent them please let me know. I would be very grateful for any help.


    Kirk
     
  2. 1975gt4don

    1975gt4don Formula Junior

    Nov 5, 2003
    665
    Peoples Rep of CA
    Full Name:
    Smog Exempt
    #2 1975gt4don, Jun 14, 2005
    Who me? I think I might have what you need with the socket, as for the open end metric wrenches, I can tell you firsthand, an oversize standard adjustable wrench will work perfectly. I just did my oil hoses myself. I live in the UTC area.
     
  3. kirk

    kirk Rookie

    Jan 27, 2004
    21
    San Diego, CA
    Full Name:
    Kirk Texeira
    #3 kirk, Jun 15, 2005
    Hello,
    Did you remove the oil hoses from the oil cooler on the vehicle or on the bench top? I tried the open-close adjustable wrenchs on the 328 to no avail.
    On for too many years. I need more leverage.
    Thanks
     
  4. 1975gt4don

    1975gt4don Formula Junior

    Nov 5, 2003
    665
    Peoples Rep of CA
    Full Name:
    Smog Exempt
    #4 1975gt4don, Jun 15, 2005
    Mine is a 75 GT4 so mine had been on longer than yours, I got them both off from the engine side first however you must remove the oil filter to gain proper access to the oil hose. That was the toughest one. My open/close wrench is very tight, not like other crescent wrenches and that helped alot.
     
  5. kirk

    kirk Rookie

    Jan 27, 2004
    21
    San Diego, CA
    Full Name:
    Kirk Texeira
    #5 kirk, Jun 16, 2005
    Thanks for your help. I tried one last time and was successful. I am waiting for Euro hoses to come on Monday. The US hoses will not work.
    Thanks again for your timely response.
     

Share This Page