Anyone know procedure to remove 328 headrest | FerrariChat
Buy

Anyone know procedure to remove 328 headrest

Discussion in '308/328' started by dhs-9, Jul 19, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dhs-9

    dhs-9 Formula Junior

    Feb 6, 2004
    292
    #1 dhs-9, Jul 19, 2006
    I am going to recover my headrest and have searched the archives on this topic (328) and have not found the definitive proceudre for this. It seems like I need to drill out the two pop rivets on the seat back and then get the padding out of the way and see some sort of button/clip for release. Also must the two black plastic trim pieces which the headrest goes into be destroyed to get the part out.

    Also I noticed under the headrest a unholstered strip which is pop rivted to the under side of the headrest in order to re upholster I take it these rivets also must be removed.

    Any guidance would be helpful
    Dave
     
  2. dhs-9

    dhs-9 Formula Junior

    Feb 6, 2004
    292
    #2 dhs-9, Jul 20, 2006
    Surely somone must have done a 328 re-upholster and had to remove the headrest.
    Your help is appreciated
    Thanks
     
  3. LarryS

    LarryS Formula Junior

    Nov 14, 2003
    302
    Fremont, CA
    Full Name:
    Larry S
    #3 LarryS, Jul 21, 2006
    I found a procedure a while ago (don't remember where) for 308qv (probably the same), it involved pushing on a place on the seat, but I couldn't get the headrests to come out. I even had the back cover off the seats. I ended up just taping off the plastic grommets and chrome supports for a leatherique respray.
     
  4. PeterS

    PeterS Five Time F1 World Champ
    Silver Subscribed

    Jan 24, 2003
    52,134
    Goodyear, AZ
    Full Name:
    PeterS
    #4 PeterS, Jul 21, 2006
    Feel around the top side of the seat (I believe on the side toward the door) and you will feel a botton (of sorts) to press. The headrest pops right out! I If my memory serves me well, that is how I got mine out of my '77 & '85QV.
     

Share This Page