anyone powder coat the stock 360 5 spoke wheels? | FerrariChat
Buy

anyone powder coat the stock 360 5 spoke wheels?

Discussion in '360/430' started by big_luke, Dec 5, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. big_luke

    big_luke Karting

    Aug 28, 2010
    151
    #1 big_luke, Dec 5, 2010
    and have any pictures of them?

    brake dust is terrible on them and I always have dug black and yellow look.


    wondering what it would what with the stock 5 spoke wheels powder coated black hopefully on a yellow car.
     
  2. dkilka

    dkilka Formula Junior

    May 8, 2007
    289
    Australia
    #2 dkilka, Dec 6, 2010
    Last edited by a moderator: Sep 7, 2017
    I had the wheels on my 348 powder coated but not on my 360.

    If you go ahead ensure you don't get any powder coat on the inside mating surface where the wheel meets the hub. This can cause major issues!

    Also the colour was a slight issue. I had mine done about 3yrs ago and at that time I was unable to find a bright silver colour as bright as the original painted finish. Even the brightest silver looked more grey once curred in the oven.

    The other option is to ensure you clean your wheels regularly. I clean mine on the 360 after every 2nd drive using just hot water! This way the dirt won't build up and effect the painted surface finish. I usually clean them before I go on a drive to ensure the disks don't rust.
    Image Unavailable, Please Login
     

Share This Page