Dave, Finally got my 599 and the stickies were already done. I was wondering if it was your work, do you get parts from Ferrari of Atlanta?
They have reached out to us a number of times but on each occasion we were extremely busy and they wanted quick turn around. I know at one point they did some rattle can jobs in the shop. My friend Tom bought his 550 from them and that was the case so he sent us all the parts to do them properly. If fact, we just finished Tom's 360 yesterday that he bought from a different dealer who rattle canned most of the parts too. If you send me the VIN, I can doubt check our records.
Here is a brief cell phone video illustrating how we rack and batch parts, down to every little button
Here are some refinished door and dash board defroster vents Image Unavailable, Please Login Image Unavailable, Please Login
Refinished 599 climate control panel (HVAC) Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Here is a coating comparison of new OEM Soft Touch (top) and our hard touch (lower, headlight control assembly) I'd say the color is a perfect match yet ours will never fail and get sticky Image Unavailable, Please Login
Here is a video I just created to help a customer assemble their vent rings. Thought it might be helpful for others
just reviving and old thread, but can anyone point me to some tips on how to remove the top cover of the steering wheel surround? i've been able to get the bottom off no problem, along with three screws of the four on the top steering wheel surround piece (the 4 screws that tie the leather backing to the speedometer cluster. i can't for the life of me figure out how to remove the last screw so i can remove and send it in to get refinished.
If youre stuck where I think you are (going off memory), I bought this tool: https://www.amazon.com/OSDUE-Phillips-Screwdriver-Reversible-Ratcheting/dp/B0B4N2LVLH/ref=asc_df_B0B4N2LVLH/?tag=hyprod-20&linkCode=df0&hvadid=693660084959&hvpos=&hvnetw=g&hvrand=1243099034518696908&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9031587&hvtargid=pla-1692402606613&psc=1&mcid=f37e066dfc3b3a6cbdf3781d75a6f0be&gad_source=1
As I mentioned to you, I'm not looking for an overlay, I'm looking for the part that I can send to you before I pull my dash apart. Get the part resurfaced before the dash even comes apart then there is no burden on the shop with the car sitting in a bay for three weeks waiting on the re surfaced part.
