Bad connector....where to get a replacement?

I'll add that when using an iPhone or iPad, you can only post one photo per post as these devices name the photos "image1" and if your try to do more than one photo per post, the file names will overwrite each other...

 

That works just fine also. Use the same instructions I wrote for posting them from the attach files point on.

 

Jerry,

That is a Metripak 150, order them here:

Metri-Pack 150

That's the same connector that is on the TR and 348 Thermocouples. I have the males here but not the female that you need.

 

Looks like a Delphi 150 series to me.
Image Unavailable, Please Login

 

Here's a little vid of the pins and housing. It's the same principle as the amp type that I did the other vid on.

https://youtu.be/QRllkHSnrDs

 

Delphi makes metripak. Those are what I posted the link for.

 

Yea Bob. I know. if I had seen your post I would not have bothered. I guess I was searching for the picture while you posted.

 

There are four parts to the complete connector. The housing, The pins, the seals and the clip at the back.

If you want to just order one of those Fou pieces then you can do it that way The link I posted was 2.95 for all 4 components as a complete connector. Check the shipping charges as well

 

I would buy a few spare pins/sockets, too. Sometimes the crimping tools don't always do what you want them to do

 

Words of wisdom.

 

Great Jerry. I don't know what crimp tool you got but here is a vid on how I crimp that same pin on 348 Thermocouples. I got that tool from Joe as well and as you can see, it does a nice job.

https://youtu.be/WDifSeT4g3o

 

What's the brand of that crimp tool? He mentions it in the video but I can't understand him.