Battery conditioner question | FerrariChat
Buy

Battery conditioner question

Discussion in 'F12/812' started by Adriangandy, Nov 23, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Adriangandy

    Adriangandy Rookie

    Feb 23, 2017
    11
    Los Angeles, CA
    Full Name:
    AdrianGPA
    #1 Adriangandy, Nov 23, 2023
    Please excuse my naivety, but i'm currently trying to charge my Ferrari F12. While the manual says remove the socket (Do I just remove the socket by force? I don't want to break anything) Or do I remove the whole lid?

    Thanks!

    Best.
     
  2. Rabies

    Rabies Karting

    Apr 4, 2020
    167
    UK
    #2 Rabies, Nov 23, 2023
    If you mean the socket and associated plug for the charger in the boot of the car, the F12 has a bespoke Ferrari fitment and the plug should have a small clip on the top that your depress to release it from the socket and it should pull out of the socket easily. The socket in mine has been moved due to some modifications to the audio system, but I believe that socket in the boot either has a small spring loaded cover or a push tight one that you open to fit the plug.
     
    Adriangandy and Caeruleus11 like this.
  3. Adriangandy

    Adriangandy Rookie

    Feb 23, 2017
    11
    Los Angeles, CA
    Full Name:
    AdrianGPA
    #3 Adriangandy, Nov 24, 2023
  4. Adriangandy

    Adriangandy Rookie

    Feb 23, 2017
    11
    Los Angeles, CA
    Full Name:
    AdrianGPA
    #4 Adriangandy, Nov 24, 2023
    Thanks for the help! So i'm just gonna pull that socket yeah as shown above? Thanks thanks
     
  5. Adriangandy

    Adriangandy Rookie

    Feb 23, 2017
    11
    Los Angeles, CA
    Full Name:
    AdrianGPA
    #5 Adriangandy, Nov 24, 2023
    tried removing the plug, can't seem to do so- is it normally hard to remove? Won't budge :/
     
  6. Caeruleus11

    Caeruleus11 F1 World Champ
    Rossa Subscribed

    Jun 11, 2013
    11,438
    #6 Caeruleus11, Nov 24, 2023
    It’s been a long time for me with the F12 but I think the connector you need to reach is just behind that panel, which is removable. It should be on clips / not too difficult to remove


    Sent from my iPad using FerrariChat
     
    Adriangandy likes this.
  7. Rabies

    Rabies Karting

    Apr 4, 2020
    167
    UK
    #7 Rabies, Nov 24, 2023
    Not sure about that - mine doesn't have a cover as it has been re-fitted - you could try prying the cover off with a flat bladed screw driver of something?
     
    Adriangandy likes this.
  8. Adriangandy

    Adriangandy Rookie

    Feb 23, 2017
    11
    Los Angeles, CA
    Full Name:
    AdrianGPA
    #8 Adriangandy, Nov 24, 2023
    Yes yes! I removed the whole damn panel because the plug was stuck. So much easier! Thanks!

    Decided to remove the panel altogether. Thanks for the help brother!
     
    Caeruleus11 likes this.

Share This Page