BBLM #29507 | FerrariChat

BBLM #29507

Discussion in 'Boxers/TR/M' started by Wolf, Dec 10, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Wolf

    Wolf Formula Junior

    Joined:
    Nov 17, 2003
    Messages:
    500
    Does anybody have pictures of #29507? Car was at the Laguna Seca races this year.
    Thanks and

    Best regards

    Wolfi
     
  2. Boudewijn

    Boudewijn F1 Rookie Lifetime Rossa

    Joined:
    May 15, 2003
    Messages:
    4,133
    Location:
    The Netherlands
    Full Name:
    Boudewijn Berkhoff
  3. Wolf

    Wolf Formula Junior

    Joined:
    Nov 17, 2003
    Messages:
    500
    Yes, thanks, I know these but they are too low-resolution for a decent print. I need them for the LM Classic application.

    Regards

    Wolfi
     
  4. CornersWell

    CornersWell F1 Rookie

    Joined:
    Nov 24, 2004
    Messages:
    4,896
    Recent reports indicate that 29507 has a new owner.

    CW
     
  5. Wolf

    Wolf Formula Junior

    Joined:
    Nov 17, 2003
    Messages:
    500
    Car was bought last month by my colleague Dr Darius Ahrabian of Munich.

    Regards

    Wolfi
     
  6. Jeff Kennedy

    Jeff Kennedy F1 Veteran Owner Silver Subscribed

    Joined:
    Oct 16, 2007
    Messages:
    6,859
    Location:
    Edwardsville, IL
    Full Name:
    Jeff Kennedy
    While Jon Masterson had this BLM there was also another one in Southern California (Duffy and Pond both, don't rememmber the overlap periods). Anyway, had a conversion during that time with Drew Kelly who was in charge of one of those and he described some items they changed/modified that you may want to check on your car to see if these were applied by Jon during the same time.

    1. Relocated fuel pump so the engine wasn't starved on long straights.

    2. The attachment for the rear window was converted to something that allowed replacement. Vaguely remember that the idea was that the original attachment was permanent (pop rivets?) and they did something that removal without drilling out fasteners.

    Jeff Kennedy
     

Share This Page