Bedding CCM - What amount of dust is normal? | FerrariChat

Bedding CCM - What amount of dust is normal?

Discussion in 'Technical Q&A' started by kommons, Sep 30, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. kommons

    kommons Karting

    Joined:
    Sep 30, 2013
    Messages:
    215
    Location:
    Silicon Valley, CA
    Full Name:
    Chris
    I just finished installing the F430 CCM kit on my 360 and went on short test/bedding drive. When I came back there was significant dust throughout even more on the drive front axle.

    Album of CCM Install

    CCM Brakes - Imgur
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    kommons, Sep 30, 2014
    #1
  2. Ferrari Tech

    Ferrari Tech Formula 3

    Joined:
    Mar 5, 2010
    Messages:
    1,216
    Location:
    Georgia
    Full Name:
    Wade Williams
    What procedure did you use to bed the new brakes?
    Ferrari has a rather lengthy procedure for bedding new CCM brakes.
    It takes a big empty lot and 32 or so rounds.
     
    Ferrari Tech, Sep 30, 2014
    #2
  3. kommons

    kommons Karting

    Joined:
    Sep 30, 2013
    Messages:
    215
    Location:
    Silicon Valley, CA
    Full Name:
    Chris
    Admittedly, I didn't go bed them yet. I was testing overall functionality. I did a few 40-20mph slow downs but not 16 consecutive as specified.

    I think I had some concern about this side of the car having considerably more dust. Perhaps the bleeding is not 100% perfect and the left is contacting first. I will re-bleed then go out on a proper bedding procedure at night.
     
    kommons, Sep 30, 2014
    #3

Share This Page