Bent dipstick 'inner tube' | FerrariChat

Bent dipstick 'inner tube'

Discussion in 'Mondial' started by decampos, Apr 18, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. decampos

    decampos Formula Junior
    Silver Subscribed

    Aug 11, 2005
    460
    Los Angeles
    Full Name:
    Ben
    I've been horrified to discover that a previous owner apparently tried to violently remove the oil pan.

    I couldn't even get the tube out of the hole, I was removing the pans anyway so I was able to retrieve it, but I've buttoned the car back up and haven't put it back, I'm sourcing a replacement.

    In the meantime, how crucial is this part? Will the tip of the dipstick really career off course without it? Will the oil level reading be incorrect? I don't know how it would be. Does anyone know for sure?

    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,960
    Isle of man- uk
    Take it to a local engineering shop and they should be able to fit a new bit of tube.
     
  3. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,090
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    I know for sure this. If it really wasn't needed Ferrari would not have gone to the expense to install it.

    I won't bother to explain why but car manufacturers don't install unnecessary mechanical parts.
     
    afterburner likes this.
  4. Mechanical Dad

    Mechanical Dad Formula Junior

    Aug 30, 2016
    381
    East Aurora NY
    Full Name:
    Josh
    Mine suffered the same fate from a previous owner. Except his mechanic managed to break the end of the dipstick off so he over filled it with oil by 7 qts during the service and wouldn'tyou know it, oil filled the intake and made a beautiful smoke screen, so...... without investigation he sold it and that's how I got my car. I just made a new pipe on my lathe and bought another dipstick. Not hard to do really. Hope you get it solved!
     
    moysiuan likes this.
  5. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,554
    San Carlos, CA
    Full Name:
    Mitchell Le
    All owners should have a lathe and the skills to use it ???
     
    decampos likes this.

Share This Page