body module | FerrariChat

body module

Discussion in 'Technical Q&A' started by Drflint, Aug 5, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Drflint

    Drflint Rookie

    Joined:
    Aug 17, 2016
    Messages:
    20
    Location:
    florida and indiana
    Full Name:
    doug flint
    dash will not illuminate and F430 will only move in 1&2 & reverse. OBD reads lost communication with body control module B.Any suggestions
     
    Drflint, Aug 5, 2024
    #1
  2. Qavion

    Qavion F1 World Champ Silver Subscribed

    Joined:
    Feb 20, 2015
    Messages:
    14,301
    Location:
    Sydney
    Full Name:
    Ian Riddell
    Get a new OBD reader? The 430 doesn't have a Body Control Module. What is the fault code number?

    Is there only an illumination issue or does the dash not work at all? Do the speedo and tacho work?
     
    Qavion, Aug 5, 2024
    #2
    imahorse and flash32 like this.
  3. flash32

    flash32 F1 Veteran

    Joined:
    Aug 22, 2008
    Messages:
    6,937
    Location:
    Central NJ
    Full Name:
    Dominick
    For the car to only go into 1 2 and reverse means the TCU is recovery/fail safe mode ..we need to see what triggered it

    First like Ian said get a better reader so we can get codes in all the modules ...the most inexpensive unit that seems to work well is the ap200 old version (white not red) ..no longer on Amazon btw

    Sent from my moto g power using Tapatalk
     
    flash32, Aug 5, 2024
    #3
    Qavion likes this.

Share This Page