Bolts & Speed Nuts for front belly pan | FerrariChat
Buy

Bolts & Speed Nuts for front belly pan

Discussion in '360/430' started by joesailor, Jul 10, 2023.

Tags:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. joesailor

    joesailor Rookie
    Silver Subscribed

    Dec 22, 2021
    27
    Palm City, FL
    Full Name:
    Joe U
    #1 joesailor, Jul 10, 2023
    On the new to me 2004 360 I discover someone replaced the 6mm bolts and speed nuts just behind the front bumprer for the belly pan with J nuts for screws and sheet metal screws. I would like to put it back - is there anything special about what Ferrari used or will generic hardware be OK?
     
  2. EastMemphis

    EastMemphis Formula 3
    Owner Silver Subscribed

    May 25, 2019
    1,853
    Memphis, TN
    Full Name:
    John
    #2 EastMemphis, Jul 10, 2023
    I have U clips (J nut?) and sheet metal screws where the bumper connects to the pan in my 360. I think that's stock. It's the same setup for the rear pan where it connects to the bumper.
     
  3. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,099
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #3 Rifledriver, Jul 10, 2023
    What makes you think the factory didn't use sheet metal screws?
     
  4. ItalGerBrit

    ItalGerBrit Formula Junior

    Mar 15, 2016
    906
    S La
    #4 ItalGerBrit, Jul 10, 2023
    The generic hardware installed at the factory is generic until someone buys the used Ferrari and wants to make sure the screws are "Ferrari" screws.
     
  5. joesailor

    joesailor Rookie
    Silver Subscribed

    Dec 22, 2021
    27
    Palm City, FL
    Full Name:
    Joe U
    #5 joesailor, Jul 10, 2023
    I just looked at the parts diagrams and yes, the sheet metal screws in front are stock. Thank you for the feedback.
     
  6. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,271
    Jacksonville
    Full Name:
    RANDY
    #6 RANDY6005, Jul 14, 2023
    I would not call them sheet metal screws, they are 6mm Phillip head screw 6 x25mm long .
     
  7. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,271
    Jacksonville
    Full Name:
    RANDY
    #7 RANDY6005, Jul 14, 2023
  8. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,271
    Jacksonville
    Full Name:
    RANDY
    #8 RANDY6005, Jul 14, 2023
  9. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,271
    Jacksonville
    Full Name:
    RANDY
    #9 RANDY6005, Jul 14, 2023
    Ferrari uses black
     
  10. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,271
    Jacksonville
    Full Name:
    RANDY
    #10 RANDY6005, Jul 14, 2023
  11. joesailor

    joesailor Rookie
    Silver Subscribed

    Dec 22, 2021
    27
    Palm City, FL
    Full Name:
    Joe U
    #11 joesailor, Jul 14, 2023
    It looks like at some point in the life of my 2004 360 the front 6 mm Philips head threaded screws and speednuts were replaced with sheet metal philips head black screws and J clips to match.
     

Share This Page