Bonnet rubber stop... where exactly does it go? | FerrariChat
Buy

Bonnet rubber stop... where exactly does it go?

Discussion in '308/328' started by Helmut, Apr 6, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Helmut

    Helmut Formula Junior

    Dec 11, 2004
    640
    #1 Helmut, Apr 6, 2010
    Last edited by a moderator: Sep 7, 2017
    I forgot where exactly this part goes and I can't find it any part diagrams. Does anybody have a picture of it installed?

    Thanks,

    Helmut
    Image Unavailable, Please Login
     
  2. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    #2 BwanaJoe, Apr 7, 2010
    It doesn't look familiar. Front or rear?
     
  3. Helmut

    Helmut Formula Junior

    Dec 11, 2004
    640
    #3 Helmut, Apr 7, 2010
    This is the part number that superformance uses 24604035, but I cant find it in any manual. I do know that my car had it since I found one from my parts when I took it all apart but I didnt track it with a photo. Superformance calls it Bonnet-Boot Stop. I suppose in the UK the trunk is the Bonnet which would put it in the rear but I am not exactly sure.... somebody must have seen this thing.

    Thanks
    Helmut
     
  4. Lorenzini

    Lorenzini Karting

    Sep 3, 2008
    85
    Granite Bay, CA
    Full Name:
    Kenneth D. Lawrence
    #4 Lorenzini, Apr 8, 2010
    This is a typical part for 250, 330, 275 series and most likely others , it is fitted in the drip chanels and more than one is used to prevent the hood/bonnet from fluttering. I do not beleive that they were fitted to the 308 series as they have weatherstripping that accomplishes the same function. If ther are no holes in the drip chanels then it dosn:t belong to your car. Cheers kdl
     
  5. shawxhurst

    shawxhurst Formula Junior

    Nov 6, 2006
    672
    San Diego
    Full Name:
    Steve Hawxhurst
    #5 shawxhurst, Apr 8, 2010
    I've got them on my 85 QV they mount in the drip channel of the bonnet about a third of the way up from the angle point of the buttress. Sorry I don't have a photo handy. One each side.
     
  6. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    #6 BwanaJoe, Apr 8, 2010
    Last edited by a moderator: Sep 7, 2017
  7. Helmut

    Helmut Formula Junior

    Dec 11, 2004
    640
    #7 Helmut, Apr 8, 2010
    Thanks for the help guys! Seems the little hole for the mounting screw got painted shut or something. I dont see a trace on my car where it could have been....

    Thanks
    Helmut
     
  8. VeloceSpace

    VeloceSpace Rookie

    Sep 4, 2009
    20
    #8 VeloceSpace, Apr 23, 2010

Share This Page