Borrani wheel knock-off nuts

I have for sale, 4 pairs of Borrani knock-offs, I don't know what car they're each for and really don't know where to start with researching that aspect in order to get accurate info. Please see the attached pictures, and feel free to ask any questions. Asking $200/pair shipped within the Continental US, International shipping is no problem if you cover the cost, open to any and all reasonable offers, need these out of the parts pile.

http://s50.photobucket.com/user/maxyedor/media/IMG_0064_zpsjifbypmv.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0064_zpsjifbypmv.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0065_zpsrlvs0mrr.jpg.html

http://i50.photobucket.com/albums/f306/maxyedor/IMG_0066_zpsv5ugmfl5.jpg.html

http://i50.photobucket.com/albums/f306/maxyedor/IMG_0067_zpslbldnrgp.jpg.html

http://i50.photobucket.com/albums/f306/maxyedor/IMG_0068_zps9bymzt8c.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0069_zpsfrwdz5tw.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0070_zps4nqurfvz.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0071_zpssuqtqtdx.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0072_zpsrxt4vdc0.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0073_zpswdfmsj0l.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0074_zpsne4cx4fd.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0075_zpsanp0ulak.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0076_zpsbqtwlcfl.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0077_zpswj6c6lyt.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0077_zpswj6c6lyt.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0079_zpsro2qar1f.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0080_zpszexlgvfx.jpg.html

http://s50.photobucket.com/user/maxyedor/media/IMG_0081_zps3ythhu9h.jpg.html

 

Which set are you interested in?

I checked the Borrani set with the engraved "42" for another f-chat member and they measured 55mm minor, and approximately 60mm major diameter, and 3.00mm pitch, close to an m60x3.00 thread with a 6h fit, though it's hard to gauge a major daimeter without a lathe enough ID thread caliper, they may be m58x3.00 6h threads.

I'll get the measurement on the other set of Borrani logo spinners tonight.

The two pairs with the Stallion ate sold pending funds.

 

Makes sense, figured the 42 was a size, but obviously is doesn't actually refer to a measured metric size.